Take the 2-minute tour ×
Database Administrators Stack Exchange is a question and answer site for database professionals who wish to improve their database skills and learn from others in the community. It's 100% free, no registration required.

i am installed memcached library by following the steps in the internet. now there is a binary file created in bin folder of mysql

now i exicuting the command memcached i am getting error like this

[root@centos1 ~]# /usr/local/mysql/bin/memcached E /usr/local/mysql/lib/ndb_engine.so -e "connectstring=10.10.111.111:1186;role=db_only" -vv -c 20 -u root

24-Feb-2012 15:21:06 IST NDB Memcache 5.5.19-ndb-7.2.4 started [NDB 7.2.4; MySQL 5.5.19] Contacting primary management server (10.10.111.111:1186) ... FAILED. Could not connect to NDB. Shutting down. Segmentation fault

please help me to resolve this problem

share|improve this question

3 Answers 3

for the previous ERROR found the solution ,but now getting new ERROR

because its NoSQL access to there should not be any mysqld process running on that node, i stopped the mysqld process and executed the same command

like

memcached -E /usr/local/mysql/lib/ndb_engine.so -e "connectstring=10.12.200.117:1186;role=db-only;debug=true" -vv -c 20 -u root



main --> ndb_initialize() 
main print_debug_startup_info(): sizeof Ndb : 144 
main print_debug_startup_info(): sizeof NdbInstance : 64 
main print_debug_startup_info(): sizeof workitem : 136 
main print_debug_startup_info(): sizeof ExternalValue : 96 
main --> connect_to_primary_cluster() 
22-Mar-2012 15:48:39 IST NDB Memcache 5.5.19-ndb-7.2.4 started [NDB 7.2.4; MySQL 5.5.19]
 Contacting primary management server (10.12.200.117:1186) ... 
main --> ClusterConnectionPool::connect() 
Connected to "10.12.200.117:1186" as node id 6. 
main --> Configuration::fetch_meta_record() 
main get_supported_version(): 1.2 
main --> config_v1::read_configuration() 
main get_server_role_id(): Name: "db-only" -- ID: 1 
main --> config_v1::get_policies() 
main get_policies(): ndb-only: get-2 set-2 del-2 flush-1 addr-0x8861898 
main get_policies(): caching: get-3 set-3 del-3 flush-1 addr-0x88652c0 
main get_policies(): memcache-only: get-1 set-1 del-1 flush-1 addr-0x88aa9e8 
main get_policies(): ndb-test: get-2 set-2 del-2 flush-2 addr-0x88aaa20 
main get_policies(): caching-with-local-deletes: get-3 set-3 del-1 flush-1 addr-0x8866b08
 main get_policies(): ndb-read-only: get-2 set-4 del-4 flush-1 addr-0x8867c60 
main --> config_v1::get_connections() 
main --> store_connection_pool_for_cluster() 
main get_connections(): [0]: { 0 => "10.12.200.117" [rtt: 250]} 
main get_connections(): clusters: 1 
main --> config_v1::get_prefixes() 
main QueryPlan(): Using Index: PRIMARY on Table: key_prefixes [SCAN] 
main get_container_record(): "demo_table" found in database (demo_table). 
main get_container_record(): "demo_ext" found in database (demo_table_large). 
main get_container_record(): "demo_tabs" found in database (demo_table_tabs). 
main --> config_v1::log_signon() 
main set_initial_cas(): Sign On GCI: 0xbb450000000b | Node Id: [6] 0x60000000 | Engine bit: 0x1000000000
 main set_initial_cas(): Initial CAS: 6589031198490624 0x1768b060000000 
main --> config_v1 destructor() 
Retrieved 3 key prefixes for server role "db-only". 
The default behavior is that: 
GET uses NDB only 
SET uses NDB only 
DELETE uses NDB only. 
The 2 explicitly defined key prefixes are "b:" (demo_table_large) and "t:" (demo_table_tabs)
 main --> Configuration::openAllConnections() 
main --> ClusterConnectionPool::connect() 
**open_connections_to_all_clusters() failed** 
main --> ndb_destroy() 
Segmentation fault 

Can any one help me out in finding solution on this

thanks in adv Deepak M

share|improve this answer

Make sure that you have at least 2 unused API slots ([mysqld] sections) in your configi.ini file (and perform a rolling restart of your Cluster after adding them). These slots will then be used by memcached.

Note that you can choose to run mysqld processes on the host as well and have them part of the cluster (can access the same data through SQL and NoSQL) - you just need to make sure that you include enough [mysqld] sections in your config.ini file so that there are a couple left for memcached.

share|improve this answer
    
hi thanks for the answer.....now its working fine....:) –  Deepak M Mar 26 '12 at 6:02
up vote 1 down vote accepted

finally i resolved this problem, now memcached service is running properly

actually i got 2 points from that

1)While working with memcached with NoSQL access then there should not be any mysqld process running on that host

2)To start Memcached service we should add 2 extra API nodes for each existing API node and after adding node perform ROLLING RESTART

like i have 3 API nodes in that 2 API node with mysqld process and the other unstarted

[mysqld(API)] 3 node(s) id=4 @10.10.221.157 (mysql-5.5.19 ndb-7.2.4) id=5 (not connected, accepting connect from 10.10.223.174) id=6 @10.10.221.254 (mysql-5.5.19 ndb-7.2.4)

now add 2 node each for each api now status become

[mysqld(API)] 9 node(s) id=4 @10.10.221.157 (mysql-5.5.19 ndb-7.2.4) id=5 (not connected, accepting connect from 10.10.223.174) id=6 @10.10.221.254 (mysql-5.5.19 ndb-7.2.4) id=7 (not connected, accepting connect from any host) id=8 (not connected, accepting connect from any host) id=9 (not connected, accepting connect from any host) id=10 (not connected, accepting connect from any host) id=11 (not connected, accepting connect from any host) id=12 (not connected, accepting connect from any host)

now perform rolling restart now node status become

ndb_mgm> show

Cluster Configuration

[ndbd(NDB)] 2 node(s) id=2 @10.10.221.160 (mysql-5.5.19 ndb-7.2.4, Nodegroup: 0, Master) id=3 @10.10.221.254 (mysql-5.5.19 ndb-7.2.4, Nodegroup: 0)

[ndb_mgmd(MGM)] 1 node(s) id=1 @10.12.200.117 (mysql-5.5.19 ndb-7.2.4)

[mysqld(API)] 9 node(s) id=4 @10.10.221.157 (mysql-5.5.19 ndb-7.2.4) id=5 (not connected, accepting connect from 10.10.223.174) id=6 @10.10.221.254 (mysql-5.5.19 ndb-7.2.4) id=7 @10.10.221.254 (mysql-5.5.19 ndb-7.2.4) id=8 @10.10.221.157 (mysql-5.5.19 ndb-7.2.4) id=9 @10.10.221.157 (mysql-5.5.19 ndb-7.2.4) id=10 @10.10.221.254 (mysql-5.5.19 ndb-7.2.4) id=11 (not connected, accepting connect from any host) id=12 (not connected, accepting connect from any host)

now start the memcached service from 10.10.223.174 node with command /usr/local/mysql/bin/memcached -E /usr/local/mysql/lib/ndb_engine.so -e "connectstring=10.12.200.117:1186;role=db-only;debug=true" -vv -u root

now its started without any error

now status of all the nodes

ndb_mgm> show

Cluster Configuration

[ndbd(NDB)] 2 node(s) id=2 @10.10.221.160 (mysql-5.5.19 ndb-7.2.4, Nodegroup: 0, Master) id=3 @10.10.221.254 (mysql-5.5.19 ndb-7.2.4, Nodegroup: 0)

[ndb_mgmd(MGM)] 1 node(s) id=1 @10.12.200.117 (mysql-5.5.19 ndb-7.2.4)

[mysqld(API)] 9 node(s) id=4 @10.10.221.157 (mysql-5.5.19 ndb-7.2.4) id=5 @10.10.223.174 (mysql-5.5.19 ndb-7.2.4) id=6 @10.10.221.254 (mysql-5.5.19 ndb-7.2.4) id=7 @10.10.221.254 (mysql-5.5.19 ndb-7.2.4) id=8 @10.10.221.157 (mysql-5.5.19 ndb-7.2.4) id=9 @10.10.221.157 (mysql-5.5.19 ndb-7.2.4) id=10 @10.10.221.254 (mysql-5.5.19 ndb-7.2.4) id=11 @10.10.223.174 (mysql-5.5.19 ndb-7.2.4) id=12 @10.10.223.174 (mysql-5.5.19 ndb-7.2.4)

now i can tryout the example from link http://www.clusterdb.com/mysql-cluster/scalabale-persistent-ha-nosql-memcache-storage-using-mysql-cluster/

NOW ITS WORKING FINE

thanks with regards Deepak M

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.