Take the 2-minute tour ×
Database Administrators Stack Exchange is a question and answer site for database professionals who wish to improve their database skills and learn from others in the community. It's 100% free, no registration required.

I am running a 1gb of RAM rackspace database server. For some reason in about 2 days the memory usage goes from using very little swap, to using 100mb. If I don't restart sql it will keep using more swap. (My my.cnf file is shown below and memory usage shown below)

Some background: I have about 50 active databases that have the same schema that use INNODB for there tables. I have a couple databases with little traffic that use MyISAM.

On the INNODB tables I do NOT use persistent connections. I also have a reporting function that creates a temporary table. (This can be resource intensive, but does NOT happen often)

I am using CENTOS 6.3 and mysql 5.5.28-log

Even though I am using swap, the performance is still pretty good. I am just afraid that if I don't restart every few days I will have a problem.

Here is my log of free -m for about 2 days: (The first record is right after a mysql restart)

12/26 2:08 PM EST
             total       used       free     shared    buffers     cached
Mem:           992        697        295          0         74        362
-/+ buffers/cache:        260        732
Swap:          976         15        961

12/26 4:10 PM EST
[root@php-pos-db ~]# free -m
             total       used       free     shared    buffers     cached
Mem:           992        791        201          0         97        405
-/+ buffers/cache:        287        705
Swap:          976         14        961

12/27 2:52 PM EST
[root@php-pos-db ~]# free -m
             total       used       free     shared    buffers     cached
Mem:           992        947         45          0         55        169
-/+ buffers/cache:        722        270
Swap:          976         34        942

12/28 1:41 PM EST
             total       used       free     shared    buffers     cached
Mem:           992        963         29          0         45        119
-/+ buffers/cache:        797        195
Swap:          976         48        927

12/28 7:24 PM EST
[root@php-pos-db ~]# free -m
             total       used       free     shared    buffers     cached
Mem:           992        957         35          0         41        141
-/+ buffers/cache:        774        218
Swap:          976         90        886

12/28 8:33 PM EST [root@php-pos-db ~]# free -m total used free shared buffers cached Mem: 992 948 44 0 48 130 -/+ buffers/cache: 768 224 Swap: 976 96 880

my.cnf

# The MySQL database server configuration file.
#
# You can copy this to one of:
# - "/etc/mysql/my.cnf" to set global options,
# - "~/.my.cnf" to set user-specific options.
# 
# One can use all long options that the program supports.
# Run program with --help to get a list of available options and with
# --print-defaults to see which it would actually understand and use.
#
# For explanations see
# http://dev.mysql.com/doc/refman/5.1/en/server-system-variables.html
#
# Take care to only add/remove/change a setting if you are comfortable
# doing so! For Rackspace customers, if you have any questions or
# concerns, please contact the MySQL Database Services Team. Be aware
# that some work performed by this team can involve additional billable
# fees.
#
# This file generated for host php-pos-db please modify
# variables if the server is resized from 1016636kB

[mysqld]

### General
user                = mysql
port                = 3306
datadir                         = /var/lib/mysql
tmpdir                          = /tmp
socket                          = /var/lib/mysql/mysql.sock
skip-external-locking           = 1
log_error                       = /var/log/mysqld.log

## This prevents using host-based authentication. That means users must be
## created using an ip-address (ie 'myuser'@'192.168.100.1') or must make
## use of the % wildcard (ie 'myuser'@'%'). The benefit to not using
## host-based authentication is that DNS will not impact MySQL performance.
#skip-name-resolve

## If open-files-limit is set very low, MySQL may increase on its own. Either
## way, increase this if MySQL gives 'too many open files' errors. Setting
## this above 65535 could be unwise (MySQL may crash).
open-files-limit                = 20000

### Cache
thread-cache-size               = 16
table-open-cache                = 4096
table-definition-cache          = 512

## Generally, it is unwise to set the query cache to be larger than 64-128M 
## as the costs associated with maintaining the cache outweigh the performance
## gains. A far superior solution would be to implement memcached, though this
## required modifying the application, among other things.
query-cache-type                = 1
query-cache-size                = 32M
query-cache-limit               = 1M

### Per-thread Buffers
sort-buffer-size                = 1M
read-buffer-size                = 1M
read-rnd-buffer-size            = 2M
join-buffer-size                = 1M

### Temp Tables
tmp-table-size                  = 64M 
max-heap-table-size             = 64M

### Networking
back-log                        = 100
max-connections                 = 50
max-connect-errors              = 10000
max-allowed-packet              = 16M
interactive-timeout             = 600
wait-timeout                    = 180
net_read_timeout        = 30
net_write_timeout       = 30
# This value is the size of the listen queue for incoming TCP/IP connections.
back_log            = 128

#### Storage Engines
## Set this to force MySQL to use a particular engine / table-type
## for new tables. This setting can still be overridden by specifying
## the engine explicitly in the CREATE TABLE statement.
default-storage-engine         = InnoDB

## Makes sure MySQL does not start if InnoDB fails to start. This helps
## prevent ugly silent failures.
innodb                          = FORCE

### MyISAM
## Not sure what to set this to?
## Try running a 'du -sch /var/lib/mysql/*/*.MYI'
## This will give you a good estimate on the size of all the MyISAM indexes.
## (The buffer may not need to set that high, however)
key-buffer-size                 = 2M
## This setting controls the size of the buffer that is allocated when 
## sorting MyISAM indexes during a REPAIR TABLE or when creating indexes 
## with CREATE INDEX or ALTER TABLE.
myisam-sort-buffer-size         = 2M

### InnoDB
## Note: While most settings in MySQL can be set at run-time, many InnoDB
## variables cannot be set at runtime as require restarting MySQL
###
## These settings control how much RAM InnoDB will use. Generally, when using
## mostly InnoDB tables, the innodb-buffer-pool-size should be as large as
## is possible without swapping or starving other processes of RAM. The other 
## two settings usually do not need to be changed, but can help for very large 
## datasets.
innodb-buffer-pool-size         = 285M
innodb-log-buffer-size          = 8M

## Be careful when changing these as they require re-generating the 
## ib-logfile* files, which must be done carefully. Do not change this unless 
## you are familiar with the procedure.
innodb-log-file-size           = 128M
innodb-log-files-in-group      = 2

## This will cause each table to create its own .ibd file
innodb-file-per-table           = 1

## Setting this to 2 will decrease disk I/O but can cause up to a second of
## queries to be lost during a hard outage (i.e. power failures)
# innodb-flush-log-at-trx-commit = 2

### Replication
## Set this to the Server's instance ID in replication environments
server-id                       = 1

#log-bin                        = /var/lib/mysql/bin-log
#relay-log                      = /var/lib/mysql/relay-log
#relay-log-space-limit          = 4G
#expire-logs-days               = 5

## This should be enabled on conventional MySQL slaves
#read-only                      = 1

## This will cause replicated statements on a slave to be written to the slave's binlog
## Enable this on the middle slave of M->S->S configs
#log-slave-updates              = 1

#binlog-format                  = STATEMENT

### Logging
## This option determines the destination for general query log and slow query log output.
## The option value can be given as one or more of the words TABLE, FILE, or NONE.
## NOTE: Table logging takes away 50% of performance and thus is not recommended
##       http://bugs.mysql.com/bug.php?id=30414
## In addition, you cannot backup the contents of these tables properly
## (mysqldump skips these tables by default since they cannot be locked)
#log-output                     = FILE
slow-query-log                 = 1
slow-query-log-file            = /var/lib/mysql/slow-log
long-query-time                = 2
log-queries-not-using-indexes  = 1

[mysqld-safe]
log-error                       = /var/log/mysqld.log

[mysqldump]
max-allowed-packet      = 16M

# * IMPORTANT: Additional settings that can override those from this file!
#   The files must end with '.cnf', otherwise they'll be ignored.
#
!includedir /etc/sysconfig/mysqld-config/
share|improve this question

1 Answer 1

MySQL does have the nasty habit being swap-happy. Jeremy Cole has best addressed this in his blog : http://blog.jcole.us/2012/04/16/a-brief-update-on-numa-and-mysql/. From that blog, you learn that there is something you can do: Add numactl --interleave=all inside /etc/init.d/mysql.

SUGGESTIONS

If the Server is dedicated to doing only MySQL, please change the following in /etc/my.cnf:

[mysqld]
innodb_open_files=1000
innodb_flush_method=O_DIRECT
innodb_buffer_pool_size=768M
innodb_log_file_size=192M

If the server is at least dual-core, add these

innodb_buffer_pool_instances=2
innodb_read_io_threads=16
innodb_write_io_threads=16
innodb_io_capacity=2000

Next, login to mysql run SET GLOBAL innodb_fast_shutdown = 0;

Next, run the following in the OS

cd /var/lib/mysql
service mysql stop
mv ib_logfile0 ib_logfile0.bak
mv ib_logfile1 ib_logfile1.bak
service mysql start

Give it a Try !!!

UPDATE 2012-12-31 08:30 EDT

From your last comment

It stopped climbing around 1 gb. I removed unused databases and it just seems mysql 5.5 stores a lot of data in memory as this didn't happen in 5.0. Did mysql change a lot?

Yes, MySQL has changed a lot. In fact, there are many cases where upgrading from MySQL 5.0 to MySQL 5.5 and resulted in performance degradation. InnoDB 5.5 is now equipped to do hyperthreading and multicore engagement.

Percona actually tested this out awhile ago.

Please read me past posts on this subject

I also wrote about this in ServerFault and StackOverflow

share|improve this answer
    
I will give this a try: What is the difference between innodb_buffer_pool_size and innodb-buffer-pool-size –  Chris Muench Dec 30 '12 at 15:30
    
innodb_buffer_pool_size of 768M might be pushing the limit on a machine with only 1 GB of RAM. Only 256M leftover for whatever is going on in the kernel and userspace outside of MySQL, plus everything that's happening in MySQL outside of the InnoDB buffer pool... You do need to set that to something but honestly I would be looking at getting more memory as well. –  James Dec 30 '12 at 17:06
    
FWIW, NUMA shouldn't be a factor here: a 1 GB machine at Rackspace running CentOS 6.3 is going to be a VM with only one NUMA node presented. –  James Dec 30 '12 at 17:11
    
@James since it is a VM you are right. Multicore tuning is unnecessary and 75% of RAM on a 1GB is too low. He needs at least 4GB. –  RolandoMySQLDBA Dec 30 '12 at 17:15
    
I upgraded to a 2gb rackspace server and the memory usage is still climbing. We are stumped on what is happening. This did NOT happen in mysql 5.0.96 –  Chris Muench Dec 31 '12 at 10:12

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.