MySQL 5.1 : The Second Major Release of MySQL 5

learn more… | top users | synonyms

1
vote
2answers
60 views

Fourth inner join to the same table increases query duration significantly

As soon as I add a fourth inner join to a specific table, the query duration increases significantly: sub 1sec to 45sec. The table in question is deployments d4. The SQL Query: select a.id as ...
0
votes
0answers
12 views

InnoDB error: exceeded log capacity…but only during import

I see this error in mysql.log: InnoDb error: the age of last checkpoint is...which exceeds the log group capacity etc.. I think I understand it, but the fact is that it's happening only during a ...
1
vote
1answer
37 views

Any known issues upgrading from MySQL 5.1.73 to 5.6.21?

I am planning my MySQL DB ver5.1.73 running on a CentOS 6.5 machine to MySQL 5.6.21. I understand the basic procedure for this based on what I have read on StackOverflow, but I was curious if anyone ...
0
votes
1answer
340 views

How to configure my.cnf for Mysql 5.1, which is using too much CPU?

I am new Database engineer. I am having trouble in my server which is using too much CPU on database query(simple count statement). I have googled about it, so i found out it depends on system ...
0
votes
1answer
214 views

Mysql query is very slow

I am developing a website like any other social networking site using mysql. I wish it give people suggestion to my users, and I have implemented this functionality in my application, but It is ...
0
votes
1answer
25 views

I noticed that my MySQL slave's DB size is smaller than the Master's DB

I have a very simple setup of a master MySQL DB with one slave MySQL DB replicating from it. Initially, when setting up the slave, I used mysqldump to get an initial DB dump from the master like ...
1
vote
3answers
147 views

MySQL: How to avoid case sensitivity in SQL queries when migrate from Windows to Linux?

I have migrated my Database from Windows to Linux server. In many places, query has been written without focusing their cases (uppercase / lowercase). So, these queries are not getting executed and ...
0
votes
1answer
276 views

MySQL: Prevent DROP TABLE and TRUNCATE TABLE on Slaves

Can someone tell me how to prevent the following commands DROP TABLE <tbl-name>; TRUNCATE TABLE <tbl-name>; from being replicated to slaves?
0
votes
0answers
514 views

The total number of locks exceeds the lock table size, even after increasing buffer pool size

I am trying to partition a table with 200 million records in it. This table already exists: CREATE TABLE linkmap_ntoken ( target_nToken varchar(200) NOT NULL, ntoken_hashcode int(15) NOT NULL, ...
-1
votes
0answers
18 views

MySQL 5.1 on Windows server - Increasing value in open_files_limit does not apply

I have increased the value of open_files_limit from 2048 to 4096 in my.ini file. But, this change has not been reflected. Below is my dedicated DB server configuration: OS: Windos 2008 R2 standard - ...
0
votes
1answer
25 views

Upgrading from MySQL 5.1.37 to MySQL 5.1.73

We have a fairly advanced website that runs on a cloud system. We have one master DB server and 2 Slave DBs that read from the Master. We're currently using 5.1.37 (I know...its old and from 2009), ...
0
votes
2answers
689 views

How to run a cold backup with Linux/tar without shutting down MySQL slave?

I run the following before tar-ing up the data directory: STOP SLAVE; FLUSH TABLES WITH READ LOCK; FLUSH LOGS; However, tar will sometimes complain that the ibdata* and ib_logfiles* files are ...
0
votes
1answer
21 views

MySQL: What do we mean by 0 value in in_use column of show open tables statement?

If I run show open tables command, system return 73 records. But, in_use column value for every record is 0. What does this mean? Are these tables available in cache but not used by any thread?
3
votes
2answers
158 views

Problem in Fetching Result set in Desired Format

I have 2 tables having the following columns Person ------ person_id, first_name, middle_name, last_name Items ----- person_item_id, person_id, item_type, status, ordered_date The query is ...
0
votes
0answers
17 views

is there any limit of MySQL status variable value?

As we know MySQL status variable is a counter variable since the service start. MySQL service in my DB server restart every week (on sunday). Below is my observation since last few week: Suddenly ...
0
votes
0answers
15 views

Intermittent My SQL error: high cpu wio and cannot connect

I have a new deployed MySQL server with following specs: Server: 2CPU x 8 cores, 16GB RAM, 300GB hdd SAS RAID 1 OS: CentOS 5.11 MySQL: 5.1.73 Now I have a very strange and intermittent problem: ...
0
votes
1answer
149 views

How can i import 150GB database after deleting ibdata1,logfile in MYSQL?

I have 150GB database and my ibdata1 file size is 240GB so i want shrink the ibdata1 file so for that i have to export the DB and then drop the tables and then stop mysql, delete the ibdata1 file and ...
0
votes
0answers
22 views

How to handle too many instances of multiple tables?

If there is a table accessed by multiple DB threads ( for example 100) at a time then how many instances of that table will be opened? If I run show open tables and see that in_use column value of a ...
0
votes
0answers
18 views

error 1298 (hy000) unknown or incorrect timezone mysql

I'm following MySQL :: MySQL 5.1 Reference Manual :: 16.1.1 How to Set Up Replication guide. I'm using: # cat /etc/redhat-release Red Hat Enterprise Linux Server release 6.5 (Santiago) # rpm -q ...
0
votes
2answers
113 views

MySQL 5.1: change datadir variable value in my.cnf

Below is my system configuration: OS: RHEL5 MySQL: 5.1.73 Default datadir=/var/lib/mysql/ But, the above directory has space crunch. So, I decided to change the path. I found /u000 directory has ...
0
votes
1answer
139 views

Whether to use or not to use: DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP

In one Database table, created_at & updated_at are defined as: `created_at` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP `updated_at` timestamp NOT NULL DEFAULT ...
0
votes
0answers
20 views

MySQL: What should I do if too many tables opened during peak hours?

In Peak hours: When I run below statement, I found around 100 tables out of 250 have opened. show open tables where in_use>0; There are around 10 tables for which in_use value are >50. Storage ...
1
vote
1answer
23 views

Do threads in cache still use memory?

I was studying about how and how much memory allocated to each connection thread and found below MySQL tutorial: http://dev.mysql.com/doc/refman/5.1/en/memory-use.html There is a point mentioned as ...
1
vote
1answer
11k views

Error Code: 1205 Lock wait timeout exceeded in MySQL

I have set InnoDB lock wait time-out to 120 seconds. When I run the query below for first time, it works fine. However, the second time, the same query with a different value gives me: Error ...
1
vote
1answer
2k views

statistics State in MySQL Processlist

I have a busy MySQL Server having query SELECT sys_sess_state, index_state, timeout_lvl, last_queued_dt, last_polled_wait_dt, create_id, create_dt, modify_id, modify_dt FROM PQR_AM_SYSTEM_SESSION ...
0
votes
1answer
21 views

MySQL: Adding innodb_log_file_size in my.cnf causes not starting MySQL service [duplicate]

I checked and found that InnoDB pluginis active. By default, Innodb_log_file_size=5MB. As per the MySQL Documentation, its ideal values range from 1MB to 1/N-th of the size of the buffer pool, where ...
0
votes
1answer
101 views

Help interpreting a MySQL execution plan

I'm trying to understand a slow query. The SELECT has been running (at this moment) for almost 18000 seconds (output from a SELECT on PROCESSLIST): id: 22 time: 17870 ...
0
votes
1answer
557 views

Why does max_connections in my.ini not match concurrent connections in Mysql instance config wizard?

MySQL 5.1.x | Windows Server 2003 Can someone please clarify why max_connections in my.ini is much larger than the manual value I specify in the Concurrent Connections Dialogue? For example, if I ...
0
votes
2answers
42 views

Using subqueries in delete query

I have a table candidate. It contains two columns name and roll. The values in all three rows of data are AA and 10. Now I want to delete only the second row. How can I do it?
0
votes
1answer
20 views

Change MAMP to use a lower Mysql 5.1 version

I need to have the same development environment for my PHP program. My clients test server is running on Mysql 5.1 while my local is using MAMP running Mysql 5.5. How do downgrade my mysql database ...
0
votes
1answer
64 views

How to avoid/prevent Aborted Connections in mysql

We are using MySQL Version 5.1.73. Database is getting huge number of connections around 600 at one time. I observed Aborted Connections are getting increased from Global Status variables. So I ...
0
votes
1answer
63 views

Insert into a view derived from a table with a discriminator field

I am in a situation in which I have a base table with some fields and a discriminator field which could have one out of a specific set of values. From that base table, I have derived many views, one ...
0
votes
0answers
17 views

Get upcoming Birthdays including Jan 1st

I currently have a script that can get up-and-coming birthdays within "x" number of days: SELECT * FROM persons WHERE datediff(date_add(birthday, INTERVAL (YEAR(curdate()) - YEAR(birthday)) YEAR), ...
0
votes
1answer
59 views

Extract one MySQL database from a FULL MYSQL Server backup file

I have a small shared windows server on which i'have installed MySQL 5.1 engine for hosting my user's mysql databases. I backup the complete MySQL databases each day by running this script as batch ...
3
votes
1answer
100 views

How to migrate from MySQL to MariaDB or Percona with minimum downtime?

I want to migrate my MySQL 5.1 database to one of these databases: MariaDB, PerconaDB or MySQL 5.6 Is there any way to do this operation with no downtime or with minimum downtime possible? How? The ...
0
votes
1answer
21 views

How can I move a MySQL database from 5.1 to 5.6?

I have pretty big database, like with 5 000 000 rows in total. It is located in a remote server. I want to copy this database to my personal computer, for testing purposes. However I don't know the ...
1
vote
0answers
66 views

MySQL 5.1 High Cpu usage on CentOS 6

I am running MySQL 5.1 on a CentOS 6 server with 16G ram. I got also apache on it. MySQL is constantly using too much cpu. top - 17:40:36 up 112 days, 12:13, 1 user, load average: 1.24, 1.72, 1.82 ...
1
vote
1answer
20 views

MySQL Replication Between Three Hosts?

We have a need to move our Moodle server to a different host, and our current host runs a LAMP stack that likely runs on a VM. It is accessed most of the time. In the event that the current host ...
0
votes
1answer
33 views

I'm trying to restore single database from mysqldump all-databases with different name

I'm running mysql-server-5.1.73-3.el6_5.x86_64: mysql> SELECT VERSION(); +------------+ | VERSION() | +------------+ | 5.1.73-log | +------------+ 1 row in set (0.00 sec) mysql> I created ...
0
votes
1answer
56 views

mysqldbcompare - ERROR: The list of objects differs among database

I'm running: # cat /etc/redhat-release Red Hat Enterprise Linux Server release 6.5 (Santiago) # rpm -q mysql-server mysql-server-5.1.73-3.el6_5.x86_64 # and mysql> SELECT VERSION(); ...
0
votes
0answers
43 views

MySQL replication working, but data is out of date

I'm trying to figure out why even though SHOW SLAVE STATUS isn't reporting any errors, nothing is replicating (see below): both nodes are running: mysql> SELECT VERSION(); +------------+ | ...
0
votes
1answer
22 views

How to restore MySQL database from Files

Primary hard disk where MySQL (version 5.1) was installed is crashed and I had to re install entire OS. I have all the files including ibdata1 file. How do I go about recreating and attaching database ...
1
vote
1answer
42 views

MySQL After Update Trigger apparently not running

I have the following After Update trigger on a MySQL table: CREATE DEFINER = 'root'@'localhost' TRIGGER phpbb_rathermenacing.phpbb_bbdkp_memberlist_AUPD AFTER UPDATE ON ...
0
votes
0answers
24 views

Text comparison select query needed that finds most whole word matches within larger string

I have a database of products, many with similar names. For example... iPhone 5s (GSM model) A1533 iPhone 5s (GSM model China) A1518 iPhone 5s (GSM model China) A1530 iPhone 5c (GSM model) ...
1
vote
2answers
362 views

SHOW SLAVE HOSTS shows incorrect output

I had used --report-host option in one of my slaves, so that I could see that under SHOW SLAVE HOSTS. Now that server is no longer in use. I have uninstalled that server as well. Unfortunately I still ...
0
votes
1answer
71 views

MySQL: How index speed up query execution

I have read multiple articles about MySQL indexes. Some of the important pages are below: http://dev.mysql.com/doc/refman/5.6/en/mysql-indexes.html ...
0
votes
1answer
415 views

MySQL: Use Sysbench on Windows

Sysbench is a tool to analyze the MySQL performance. I downloaded it and extracted but there is no executable file. Files having extensions like .sh or .c or .h are available. I gone through the ...
0
votes
1answer
255 views

MySQL 5.1.x: Performance improvement in Enterprise edition Vs community edition

My application is running on MySQL 5.1.58 community edition. I tried to search enterprise edition of MySQL 5.1.X but only MySQL 5.6.X version of enterprise edition is available. Is it possible to ...
0
votes
1answer
41 views

MySQL: How turning off the logging affect the performance?

OS: RHEL5 DB: MySQL 5.1.73 community edition DB size: ~1GB I have setup a testing environment and turned off all logging - general logs, binary logs, slow query logs etc. I am using Oracle ...
1
vote
0answers
35 views

Merge/combine two queries with different dates

I have one query that runs a SUM statement based on daterange 1, and worked fine, and another query that run same SUM statement, but on a different date range. I would like to merge/combine the two ...