1
vote
1answer
59 views

Database Mirroring and Replication in SQL Server 2008 R2

I have configured the mirroring and replication between 4 servers (A,B,C,D).i.e, Mirroring between A to B and C to D, Replication between A and C. The configuration was a success and I am able test ...
0
votes
0answers
45 views

Transactional Replication

SQL server 2008 R2. I have set up transactional replication on 40 tables in a database (other tables don't replicate). There was an issue in the morning and it is fixed now. I resynchronised the ...
0
votes
1answer
50 views

SQL Server distrb.exe & Logread.exe using huge SQL.txt file in C:\Users\sqlsrvacct\AppData\Local\Temp folder

I have the following situation: SQL server 2008 R2 SP2 I have both the Distribution and Subscription database in this server. LogReader agent and Distribution agent are running in continuous mode the ...
0
votes
0answers
128 views

SQL Server Replication Monitor Throwing “Specified cast is not valid. (ReplicationMonitor)” Error

The publisher is running SQL Server 2008 R2 on a Server 2008 R2 box. The subscriber is running SQL Server 2012 on a Server 2012 box. I have tried launching the replication monitor from both servers ...
2
votes
1answer
91 views

Is it possible to replicate wide table in MS SQL?

The reason of me using sparse columns is to overcome limit of 1024 columns in a table (I know that generally it's not a good reason and there are downsides, but in my situation it's good option ...
1
vote
0answers
58 views

SQL Server replication - recommendations for stability

We have two SQL Server 2008R2 Standard servers, and we've set up replication of a single database between them. The replication is about as simple as it can get - it's a transactional replication from ...
3
votes
2answers
38 views

Is my Publisher database my actual source database or is it a new database?

I am setting up transactional replication for the first time and am working through my backup policies I need to set. Is my Publisher database my actual source database? Or is it a new database that ...
3
votes
1answer
71 views

Log Shipping in lieu of replication

I have two SQL Server 2008 R2 systems that, due to network restrictions, cannot use SQL Server replication. However, data needs to be shared between these systems. It may be possible to send a file ...
0
votes
2answers
181 views

What locking can I expect with DBCC CHECKIDENT(RESEED)

I'm working on a project that has hit a bit of a snag: I'm replacing some replication with a home built system so that if replication goes down we don't blow our SLAs with our customers and shell out ...
1
vote
0answers
128 views

Log file growth due to replication issue

I have one primary database and it's getting replicated to another server. Both servers are SQL Server 2008 R2 with SP1. Replication was running fine till last week. We have transaction log backup ...
0
votes
1answer
1k views

Best Possible Solution for Reporting Mirroring or Replication?

Hi I have SQL SERVER 2008R2 Data Centre Edition and I use SSRS and a Vendor application for reporting. I have a Reporting Server where we backup and restore everyday from Live Server to have Data ...
0
votes
1answer
356 views

SQL Server Transactional Replication over Internet

I have 2 instances with SQL Server 2008R2 and i would like to build Transactional replication between those server, one is in the Local Network (Local_Instance) and the second server is over Internet ...
1
vote
1answer
286 views

SQL Server Data Transactional Replication of huge data, locking down table

We have setup data transactional replication from Server-A(SQL Server 2008 R2) to Server-B(SQL Server 2008 R2). We have a SQL Job scheduled to run everyday on Server-A, which executes single UPDATE ...
3
votes
3answers
286 views

Initializing Transactional Replication From two Different Database Backup

I have two different large Database (200GB for each) which I want to replicate their data to a central database (3rd DB). I followed this link and it was very useful for a single database. But my ...
1
vote
0answers
88 views

Row not being deleted from the publication when it's deleted in a subscription

We've merge replication configured in our environment(1 Publisher, 3 Subscribers) and We know by default merge replication is bi-directional. Its working fine in case of inserts i.e, if a row is ...
1
vote
1answer
230 views

Replication is missing a specific set of rows on subscriber

So I've got two servers, we'll call them Server A and Server B. Server A has a table, Table 1, which gets replicated to Server B. Server B has a table, Table 2, which gets replicated to Server A. ...
3
votes
1answer
264 views

Improve performance of transactional replication

I 'm testing implementing transactional replication . The replication works fine if I insert/update handful of rows. The problem occurs when I have a sql job running which deletes/updates & ...
2
votes
1answer
144 views

Is the Service Broker good for publishing data between servers?

I'm trying to find a better solution when publishing data to a remote table. So we have Server A and Server B. Server A holds a master table which should be replicated to Server B. Currently, we ...
1
vote
0answers
67 views

Setting up replication alerts

I 'm trying to configure alerts for replication. Currently on my test setup I run everything under user 'sa'. When I try to set up alert for agent failure I get the following error Login failed for ...
3
votes
1answer
240 views

Replication Not Replicating

I'm trying to set up transactional replication between two SQL Server 2008 R2 databases and, no matter what I try, it just doesn't seem to work, and I'm not sure where to look for further information ...
2
votes
1answer
792 views

Invalid object name 'master.dbo.MSreplication_options' when restoring DB

I've tried Googling for an answer to this but have got nowhere. I have one SQL Server instance whose replication is set up to be a publisher and a distributor of FooDatabase. I have a second ...
2
votes
1answer
38 views

Removing superfluous tables with a synchronization?

I'm using SQL Server 2008 r2's replication functionality to update my subscriber database through a transactional pull subscription. When I mark it for reinitialization, it does fix the schema and ...
1
vote
1answer
168 views

How to edit publication's generation_leveling_threshold configuration value

I dont know where I put this code: update sysmergepublications set [generation_leveling_threshold] = 0 I only need do it. But I need edited any funcion of agent.
0
votes
1answer
214 views

Compatibility level for published database and transactional replication

I am running a database on compatibility level 80 because the application using it does not yet support a higher level. It is my understanding that transactional replication on SQL Server 2005 and ...
0
votes
1answer
711 views

SQL replication Agent permission

Error messages: The schema script 'teste2_2.sch' could not be propagated to the subscriber. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201001) The process could not read file ...
3
votes
1answer
842 views

SQL Server Many-to-One replication

I have 8 individual SQL Server 2008 R2 machines, each hosting 1 database. Each database has an identical table structure and schema, and entirely unique data. I would like to establish a reporting ...
0
votes
1answer
111 views

distribution.dbo.MSdistribution_history comments explanation

The comment column of distributor.dbo.MSdistribution_history contains comments such as <stats state="2" fetch="11554" wait="214007" cmds="17898546" callstogetreplcmds="106880"> ...
4
votes
1answer
129 views

How to reinsert corrected rows from the conflict table?

I have a bidirectional merge replication. I had failure constraints because the primary key was just integer. I change the primary key to the old primary key + a location identifier.The problem is how ...
0
votes
2answers
118 views

Can I use replication/mirroring to have a “Current” database and a “Full History” copy?

I have a database that is used for current operations. The amount of data is starting to get a bit to much for the applications using it. Most of the data is older and is very rarely needed. I am ...
4
votes
2answers
658 views

SQL Server replication for off site copy

We have our Primary SQL Servers in-house (15 primary servers at the moment (500 databases approx overall), most of the servers have hex core processors). These are mirrored to other backup servers in ...
5
votes
1answer
536 views

How can I determine the date of a snapshot in SQL Server 2008r2?

I am working on implementing an ETL process to load data into a warehouse. Part of this process is pulling data from our production server (Server P) to a staging server where the actual load into ...
5
votes
1answer
648 views

Transactional Replication not sending all commands

I have a transactional replication topology as follows: NY Publication Database same server holds distributor NY - Subscriber LON - Subscriber HK - Subscriber We are using bog standard, one-way ...
5
votes
1answer
394 views

The issue of sp_MScheckIsPubOfSub stored procedure

We have SQL Server 2008 R2 Merge replication set up. We have 20+ push subscriptions. Once in a while I get the following error message during the sync: Error messages: The merge process could not ...
0
votes
0answers
232 views

Real time replication issue - can't use transactional replication

We have an existing Microsoft SQL Server 2008 R2 database that we need to real time replicate to an identical off-site live web database. Transactional replication and merge replication will not be ...
10
votes
3answers
2k views

SQL Server database synchronization

Problem definition Our users need the ability to query a database that is mostly up to date. The data can be stale up to 24 hours and that is acceptable. What would be the lowest cost approach to ...
7
votes
1answer
749 views

Does SQL Server Snapshot replication completely copy the data every time or does it issue deltas?

I am looking at snapshot replication between two servers. Here is what I have: 500GB database ~500MB nightly bcp loads ~50MB daily transactions I was asking other DBAs in the company about which ...
7
votes
2answers
2k views

Impact of changing the DB compatibility level for a Published replicated DB from 90 to 100

I have a SQL Server 2008 R2 server with a bunch of published databases that are currently operating under compatibility level 90 (2005). The subscription databases are also SQL Server 2008 R2, ...
8
votes
1answer
397 views

Initializing Transactional Replication From Backup

There is an option when setting up a publication for replication to Allow Initialization From Backup. We have been creating replicated databases for several years now and have always initialized from ...
4
votes
1answer
732 views

Replicating multiple databases into one database

I would like to replicate multiple databases on different servers into one master database. I have 5 different instances on separate servers all running SQL 2008 R2. The schemas and structure are all ...
7
votes
1answer
292 views

SQL Server considerations when backing up / restoring a database that uses replication

In the event that I need to restore a database involved in replication, what considerations to I need to keep in mind? Do I need to keep backups of both the publisher and the subscriber? Can I ...
2
votes
2answers
313 views

SQL Replication Commands

I'm trying to figure out how i can get the number of commands over the last day for a sql server replication. Transactional / Snapshot / Merge. I really want to be able to calculate the average ...
6
votes
0answers
224 views

Msg 14027, Level 11, State 1, Procedure sp_MSrepl_addarticle [table] does not exist in the current database [closed]

Before setting up SQL Server snapshot replication, I backed up the database from ServerA and restored it to ServerB. Both servers are running SQL Server 2008 R2 SP1. In trying to setup snapshot ...
0
votes
1answer
434 views

Where is sp_MSrepl_getpublisherinfo in SQL Server?

In learning about replication in SQL Server and having problems creating a subscription, I looked at the definition for sp_addsubscription. It calls sys.sp_MSrepl_getpublisherinfo, which I cannot find ...
4
votes
2answers
587 views

Massive peer-to-peer replication topology?

We have a client that's geographically distributed in remote communities, with somewhat unreliable network/internet connectivity between each of the physical locations. There is a single central ...
2
votes
0answers
330 views

What is causing all of the msrepl_tran_version columns to become out-of-sync between locations in transactional replication setup?

I have been having a recurring issue with transactional replication setups at the firm I work for. We use SQL 2008 R2. Seemingly without warning or any replication errors, all of the ...
0
votes
1answer
71 views

Copy snapshot files from Publisher, Paste and Apply on subscriber in SQL Merge Replication

I read an excellent article about copying the snapshot files for Transactional replication from Publisher to Subscriber and Apply them on subscriber. ...
1
vote
1answer
645 views

Copy SQL table to other server identity becomes int

I just built an Umbraco website. This uses a not-that-small SQL Server db. I copied this DB using the export data function built in in SQL Server 2008. This copies all the tables and their content ...
6
votes
3answers
7k views

Add article to transactional publication without generating new snapshot

Using SQL 2008 R2 transactional replication with pull subscribers, when we add an article, I'd like to avoid having to create an entire snapshot (the db is ~80 GB, so this takes hours). From this ...
2
votes
1answer
161 views

Dropping then adding a table to a subscription with Identity option Not for Replication causes errors

We have a Transactional Replication environment that was initialised from a backup that replicates the data for several hundred tables. When a table is altered, say a new column added, I have created ...
3
votes
1answer
741 views

Replication slows down on massive deletes

First of all, I'm not a DBA, but I'd like to get advice how to deal with the following issue. We have few database servers based on SQL Server 2008 R2 SP1. They have been organized as shown below, so ...