Replication is the process of sharing any level of information so as to ensure consistency between redundant hardware/software resources to improve reliability, fault-tolerance, and accessibility

learn more… | top users | synonyms

0
votes
1answer
134 views

Replication monitoring refresher for distribution job affecting performance

I have a performance problem due to a sql agent job executing dbo.sp_replmonitorrefreshjob. The environment is a 2 node Cluster with SQL Server 2005 SP2 and with transaction replication. The OS ...
0
votes
1answer
39 views

Does Galera Cluster rsync only updated files or all files

We're currently setting up a galera cluster using rsync for sst. The datadir is currently 20Gig and right now we're only updating about 4 (very large) tables. I know that rsync normally only ...
3
votes
3answers
492 views

Finding differences between a master and slave when pt-table-sync fails

I have a table that's showing some differences on a master and slave according to pt-table-checksum (PTC). I've found some verifying differences beyond that. Certain tables in the mix have composite ...
0
votes
1answer
17 views

Where to look for Agent history in Replication?

In SQL server 2008R2 replication configuration, "agent history cleanup distribution" job by default runs every 10 minutes and deletes any historical data older the 48hrs. If I increase the retention ...
1
vote
2answers
4k views

Shell Script / Tool to check the MySQL Replication Status? [duplicate]

Possible Duplicate: Monitoring replication on mysql I am running with MySQL Master/Slave Replication on Linux. Is there any tool/Shell script which monitors the Replication Status and send ...
1
vote
1answer
139 views

Relaying changes to a slave from another master with Tungsten on MySQL

I am trying to setup a multi-master type of replication with each master having an additional slave using Tungsten. As an example, lets say I have 4 hosts (A,B,C,D) and hosts A and C are the masters, ...
2
votes
1answer
289 views

sp_startpublication_snapshot Parameter(s)

I am creating a stored procedure that: Restores a DB from a .bak giving the .mdf and .ldf a new name (so we have have several copies of the same DB up (If specified in the SP's parameter) Creates ...
1
vote
1answer
20 views

Postgres 9.4, replication slots, doesn't work failover master

I've installed postgres master and slave nodes by this manual: At the master (10.0.0.1): sudo -u postgres initdb -D /data/postgres/main Change postgresql.conf: listen_addresses = '*' wal_level = ...
1
vote
1answer
154 views

MySQL replication using a lot of IO

I'm having big troubles on a database pool I've setup recently. There is a master, and 4 slaves replicating one DB. All using MyISAM engine. Thing is, during the replication period (when the slave ...
0
votes
1answer
371 views

SQL Server replication - set PollingInterval in sp_addmergepushsubscription_agent

I am trying to create replication subscriptions to and SQL Server 2008 R2 via a script. There are 3 subscribers so this script creates the subscriptions by calling sp_addmergesubscription and then ...
0
votes
1answer
11 views

How to force a delayed member to become primary in case of failure in mongodb

I have three member set [primary,secondary & arbiter] in my data center 1 [DC1]. Now i want a delayed member in data center 2 [DR]. In case DC 1 is completely down then my sub net application ...
0
votes
0answers
7 views

After merge replication setup, tables at subscriber not getting any data from publisher

I have created a merge replication setup through Replication Wizard. After sync, it is observed that the subscriber DB gets created with the exact tables in publisher as intended, but on the ...
0
votes
2answers
224 views

MySQL incremental backups per database (not global)

While searching for free/open-source MySQL incremental backups solutions I have found a number of ways to do incremental backups and all of them seem to either rely on "logical" way of backups/restore ...
0
votes
2answers
47 views

sql server transactional - replication - the internal procedures often deadlock with user processes

Very often I have deadlocks on my subscription server, involving the replication internal stored procedures and user processes either ad hoc or procedure queries. For example: Deadlock of the ...
-2
votes
0answers
28 views

TCP Provider: The semaphore timeout period has expired [on hold]

In Sql Server2008 R2 and Windows Server 2008R2, when I start Replication I have this error: TCP Provider: The semaphore timeout period has expired Please help me to solve it... Thanks!
1
vote
2answers
1k views

Which one to use? InnoDB Replication or MySQL Cluster?

I am building a url shortener and I use InnoDB as the storage engine for link data. I will start with a single VPS containing both application instance and MySQL database instance on the same Virtual ...
3
votes
1answer
231 views

Updateable Subscriptions: Rows do not match between Publisher and Subscriber

I have transactional replication with updatable subscribers set up in SQL Server 2008. It has 3 subscribers and 1 publisher. I had to setup replication again due to some errors related to the database ...
0
votes
1answer
28 views

Replication Configuration

I had a SQL Server 2008 Express edition as a Default instance and I am having SQL Server 2012 Evolution and SQL Server 2014 Evolution are my named instances. When I was trying to configure ...
2
votes
1answer
277 views

Bi-directional replication for the same MySQL table

AppA stores/retrieves data from dbA.tableA AppB stores/retrieves data from dbB.tableA tableA definition is the same across these databases. To start with dbB.tableA was copied from dbA.tableA ...
1
vote
1answer
106 views

Sql Server 2008r2 Replication Snapshot Agent Hang

I am setting up a new merge publication, but I can not get the snapshot agent to run successfully. In fact, I can not run any snapshot agents for any of the other publications on this server now. ...
0
votes
1answer
198 views

MySQL 5.6 replication causes 'waiting for table lock'

All of the sudden queries on slave server stopped with status "Waiting for table level lock" I restart mysql service and stop replications and locking does not show up anymore. Once I turn ...
0
votes
1answer
356 views

SQL Server 2008R2 - how to install replication components

I am trying to install the Replication components for SQL Server 2008R2, on technet website it says: On the computer that is running IIS, insert the SQL Server 2008 R2, SQL Server 2008, or SQL ...
1
vote
1answer
337 views

Syncronize mysql databases between local and hosted servers automatically

We have many website with Development , Staging and Production Server. we have many developers for many projects, we need a solution to synchronize the database with developer database with staging ...
0
votes
1answer
167 views

Using non-replicated read/write databases on a MySQL slave server

I have a MySQL slave server that has two databases being replicated from a master. What I'd like to do is add a third database that I will exclude from replication and use as a read/write database. ...
0
votes
2answers
336 views

SQL Server 2005 to 2012 Replication, cannot access replicated data

I have created publication (snapshot, small table with 10 rows) on MS SQL Server 2005. Then, I created push subscription on MS SQL Server 2012. When I try to select data form table, process takes ...
0
votes
0answers
25 views

How to troubleshoot, find and fix query Percona 5.6 with error “SQLSTATE[HY000]: General error: 1785 When @@GLOBAL.ENFORCE_GTID_CONSISTENCY = 1”

i'm running Magento CMS, and underneath there are 2 physical servers both with Percona Server version: 5.6.23-72.1-log Percona Server (GPL), Release 72.1, Revision 0503478 in Master/Slave ...
0
votes
1answer
650 views

How to generate replication snapshot without locking tables

When I reinitialize subscription and generate new snapshot it locks all tables and makes the database unusable for a very long time (never waited it out). Is there anyway to do this without locking?
2
votes
1answer
126 views

Mongodb replica sets: why does my master server occupy more disk space than my slave?

I have two servers on my replica set. Let's call it the master and the slave, for the purpose of this discussion. The master was the original one, and the slave was replicated from that master. At ...
1
vote
1answer
33 views

MySQL 5.6 Slaves Fail to Reconnect to older MySQL server when it goes down for backups

I have an existing replication setup with Masters and Slaves running MySQL 5.0. A long existing script runs at night which restarts MySQL on the master with skip-networking, runs a backup, and then ...
2
votes
4answers
13k views

Broken mysql replication on slave server (error 1236)

My question is: how to fix broken mysql replication on slave server (error 1236)? server 1 (192.168.1.105) server 2 (192.168.1.106) I ran these steps to re-sync: At the master - server 1 ...
2
votes
2answers
48 views

migrate db's - best way to mirror or replicate a full database

I would like to mirror/replicate my databases to the cloud. The cloud is setup using VPN to my actual machine. I am a bit confused by the options I have and would like to get some light into it. My ...
0
votes
1answer
18 views

Run MySQL replication by schedule or on demand

I have a master-slave replication currently configured. I know this setup runs real time. Is it possible to sync only the databases on schedule (daily or weekly) or by demand? Thanks!
0
votes
1answer
112 views

MySQL - How to see the queries executing by slave io thread

We have a strange problem with MySQL replication. We have observed huge load and IO wait on server while replication is in progress. We can have information of the queries from bin-log by using ...
4
votes
1answer
445 views

SQL Server 2005 Replication

I am in the process of creating Replication between 2 Remote Servers, server 1 is the Distributor and Publisher and server 2 is the Subscription. server 1 windows 2003 server 192.168.10.1 connected ...
0
votes
1answer
539 views

mysql replication - missing table for foreign key on slave

i have the following situation: We're running a simple master slave replication with table filters, so the slaves doesn't have all the master tables. Master has table A with FK to table B Slave has ...
2
votes
0answers
24 views

Warm Standby PostgreSQL 9.4 error; FATAL: the database system is starting up [closed]

I want to setup a Master and a warm standby, so far here's what I have setup: Master postgresql.conf listen_addresses = '*' wal_level = archive archive_mode = on archive_command = 'copy "%p" ...
0
votes
0answers
30 views

Converting MySQL master-master replication to master-standby

I set up two mysql servers in a master-master configuration. This was working fine until recently when I encountered a duplicate-key problem. After doing some research and evaluating my needs, I ...
2
votes
1answer
610 views

All four data nodes in MySQL Cluster in same node group

I am testing MySQL Cluster 7.2. I have two servers, mysql1 and mysql2. I want the management server and two data nodes to run on mysql1 and two other data nodes to run on mysql2. My config.ini file ...
1
vote
1answer
572 views

What are alternatives to Replication to distibute data (Microsoft SQL Server)

Is anyone knowledgeable of alternatives to SQL Server replication? I have a scenario where separate databases will share a lot of the same data which complex queries will match against. We want to ...
0
votes
1answer
394 views

pgpool2 not working on my Ubuntu i686 athlon i386 GNU/Linux

I am trying to implement replication and load balancing on my Ubuntu i686 athlon i386 GNU/Linux.for creating database clustures I have installed postgresql contrib 9.1.11 having initially database ...
0
votes
1answer
54 views

Can SQL Server replication be used for Point-of-Sale (POS)?

We are looking for a solution that will synchronize the databases of our POS. The scenario says we have 3 POS with SQL Server Express installed on each machine. We want these databases to be in-sync ...
1
vote
1answer
2k views

MySQL slave stuck at 'System lock' most of the time, high CPU usage

Let me describe what we are facing now: We have a MySQL Master-Slave, Row Based Replication setup and at the moment, the slave is stuck with a perpetual System Lock. The Master is an active server ...
3
votes
1answer
2k views

Cannot get my slave - replication server to start

My replication server will not start. I have followed the instructions here: http://opensourcedbms.com/dbms/setup-replication-with-postgres-9-2-on-centos-6redhat-el6fedora/ As well as several other ...
3
votes
1answer
630 views

SQL Server Troubleshooting Replication and Long-Running fn_dblog query

I am trying to get (pull) Transactional Replication working again for a subscriber. Currently, in Replication Monitor I am seeing messages in the Publisher to Distributor tab and the Distributor to ...
1
vote
3answers
717 views

How to remove master role from MySQL server

I have 2 MySQL servers, one is the master and other one is slave, that's all good. The problem I have is that the slave is also set up as a master. I would like to disable or remove the master role ...
1
vote
1answer
1k views

mongodb replication node stuck at “STARTUP2” with optimeDate as 1970

i have just setup replica sets with three nodes . the third node is stuck at stateStr STARTUP2 with "optimeDate" : ISODate("1970-01-01T00:00:00Z"). However its showing no error message. Is this ...
1
vote
3answers
194 views

Question on having a MySQL 5.1 replicate from a MySQL 5.6 DB

I have a question in regards of what potential issues that might happen with a MySQL 5.1 DB that replicates from a MySQL 5.6 DB. I know the risks involved based on resources such as ...
0
votes
1answer
172 views

MongoDB can't add new replica set member

I have a replica set, and I added a new member to the set. The initialSync begins for the new member and rs.status (on primary) shows STARTUP2 as status. However, after a long enough time, there's a ...
0
votes
1answer
3k views

Mysql replication is enabled but stuck at “waiting for binlog to be updated”

I have set up replication between an existing database (server-id=23), and a new one (server-id=51). I have followed the steps in this stackoverflow question, but replication is not happening. On ...
0
votes
1answer
74 views

“Oneway” Replication from Oracle DB to TimesTen

currently I'm really stuck into a problem and I not able to finde a nice way to realize that. I need a suggestion to replicate from oracle db (some tables) to a TimesTen. A connection is only ...