Replication is the process of sharing any level of information so as to ensure consistency between redundant hardware/software resources to improve reliability, fault-tolerance, and accessibility

learn more… | top users | synonyms

3
votes
1answer
733 views

Log Reader Agent is not running - The job failed

I created a transactional replication on PRE-PROD (via TSQL) and everything works as expected. On PROD platform replication is not working. While inspecting Replication monitor, I get this error ...
0
votes
0answers
7 views

Error 2003: Setting up MySQL Replication

Trying to setup MySQL Replication using this guide here : http://wpguru.co.uk/2013/05/how-to-setup-mysql-masterslave-replication-with-existing-data/ I was able to do this on two random VMs running the ...
1
vote
1answer
193 views

SQL Server replication conflicts after migration from 2000 to 2008

I got a suggestion over at Stackoverflow to post here....greatful for any and all help. Please bear with me I think this might take a while to explain. For many years now my company has hosted a ...
1
vote
2answers
459 views

Which one to use? InnoDB Replication or MySQL Cluster?

I am building a url shortener and I use InnoDB as the storage engine for link data. I will start with a single VPS containing both application instance and MySQL database instance on the same Virtual ...
1
vote
2answers
179 views

Upgrading to MySQL 5.6, benefits to switching to GTID replication?

We have the most basic of MySQL replication setups, a single Master doing statement-based replication to a single Slave, a 90/10 mix of innodb/myisam tables. Both run Percona MySQL 5.5 at the moment ...
0
votes
0answers
22 views

MySQL replication working, but data is out of date

I'm trying to figure out why even though SHOW SLAVE STATUS isn't reporting any errors, nothing is replicating (see below): both nodes are running: mysql> SELECT VERSION(); +------------+ | ...
3
votes
1answer
406 views

SQL Server Troubleshooting Replication and Long-Running fn_dblog query

I am trying to get (pull) Transactional Replication working again for a subscriber. Currently, in Replication Monitor I am seeing messages in the Publisher to Distributor tab and the Distributor to ...
1
vote
3answers
41 views

How to auto replicate specific columns only from a table in MySQL

I want to make one master DB which replicates specific user data into other databases such as: username pass (hashed) email pin (hashed) timezone (int) They are all in one table and running on ...
3
votes
1answer
21 views

timeline 2 of the primary does not match recovery target timeline 1

I want to create a configuration with postgresql and pgpool to get height availability (HA). I want to do this: .-----. .--------. | | W | DB | | APP ...
1
vote
1answer
17 views

Multi Replications Plan on 2 servers

I need some advice about our new database deployment plan. We have 6GB of total mysql data(all innoDB) and innoDB_buffer_pool is set to be 16GB Ans we have 2 database servers.(plus 1 server for the ...
0
votes
1answer
48 views

CRC checkup in MongoDB

I am new to MongoDB and currently working on a project. I read tutorials but I'm unable to find any information about Cyclic Redundancy Check (CRC) in MongoDB. Is there any way to check that the data ...
1
vote
1answer
82 views

Database Mirroring and Replication in SQL Server 2008 R2

I have configured the mirroring and replication between 4 servers (A,B,C,D).i.e, Mirroring between A to B and C to D, Replication between A and C. The configuration was a success and I am able test ...
1
vote
1answer
91 views

pt-table-checksum and row-based replication

The set up I work with is MySQL 5.5 in a master-slave replication configuration, but we have to use "MIXED" replication (statement and row-based) because we use an application that requires it, and it ...
2
votes
2answers
3k views

Mongo replicated shard member not able to recover, stuck in STARTUP2 mode

I have following setup for a sharded replica set in Amazon VPC: mongo1: 8G RAM Duo core (Primary) mongo2: 8G RAM Duo core (Secondary) mongo3: 4G RAM (Arbiter) Mongo1 is the primary ...
3
votes
2answers
96 views

Replication with FileStream

I need to setup database replication (for high availability) on a database that uses FileStream. This is on SQL Server 2012 Standard Edition, so Always On or Peer-to-Peer replication is not an option. ...
0
votes
1answer
424 views

MySQL failover - Master to Master Replication

My company is trying to implement a MySQL failover mechanism, to achieve higher availability in our webservices tier - we commercialize a SaaS solution. To that end we have some low-end VMs scattered ...
0
votes
1answer
30 views

Can a slave with a dynamic ip update the master

How can I setup mySQL replication in such a way that a slave on localhost with dynamic IP can update the master as well as get updates from the master which has a static IP. The slave will not be ...
0
votes
1answer
20 views

Synchronize part of the tables to use offline (no internet use) then sync back to server

I read some synchronization post but seems not suit my case. As I will sometimes go travelling locally and other country which I may have no access to internet then I could not even get the data in my ...
1
vote
1answer
58 views

Mongodb replica sets: why does my master server occupy more disk space than my slave?

I have two servers on my replica set. Let's call it the master and the slave, for the purpose of this discussion. The master was the original one, and the slave was replicated from that master. At ...
1
vote
1answer
51 views

SQL Server Cross Domain Transcational Replication

Has anyone got any documentation for doing/implementing Cross Domain SQL Server 2012/2008R2/2008 transactional replication document or steps (with screenshot or without screenshot) Thanks for your ...
2
votes
1answer
42 views

MySQL Replication - Master Master - Single Master write

I am looking to improve our fault tolerance for our persistent store. After reading several online docs about how to set-up master <> master replication, I'd still like to ask the experts about the ...
5
votes
2answers
512 views

“Arithmetic overflow” when initializing SQL Server 2012 replication from backup

I'm initializing SQL Server replication from a backup, by following instructions from here: http://www.mssqltips.com/sqlservertip/2386/initialize-sql-server-replication-using-a-database-backup/ ...
0
votes
1answer
19 views

PostgreSQL synchronous replication time out?

I'm using PostgreSQL 9.3 with synchronous replication. I have 2 synchronous replicators and 1 async replicator. My problem is when 2 synchronous replicators are down, transaction will wait ...
2
votes
2answers
889 views

SQL Server Replication: “ALTER TABLE ALTER COLUMN” is not propagated to subscribers

We are running SQL Server 2008 R2 SP1 as publisher & distributor, and SQL Server 2005 SP3 as subscriber. The replication of schema changes is activated, and the replication has been running for ...
0
votes
0answers
13 views

Which primary keys must be specified when using slony PostgreSQL replication?

I'm extremely green when it comes to databases, so forgive my ignorance. I've been researching ways to replicate our production Postgres DB, and I've decided to try out Slony. Since the server is ...
0
votes
0answers
14 views

Understanding correct procedure to recover master in master-slave replication in PostgreSQL

For learning, I have setup master-slave streaming synchronous replication. Pg-pool 3.3.3 is installed in one VM and it connect to 4 VMs which runs PostgreSQL 9.3, one master and 3 slaves. Replication ...
0
votes
1answer
172 views

exception: hosts cannot switch between localhost and hostname

I created a replication set. I added localhost in the set in the beginning, but when I try to edit the member with the actual hostname. I get error "exception: hosts cannot switch between localhost ...
1
vote
0answers
19 views

Understanding pg-pool in details

I have following problem regarding the pg-pool (3.3.3) When master fails, automatic failover happens and standby is promoted to master. But this new master don't have any replicators. Other slave ...
0
votes
1answer
170 views

MySQL: Prevent DROP TABLE and TRUNCATE TABLE on Slaves

Can someone tell me how to prevent the following commands DROP TABLE <tbl-name>; TRUNCATE TABLE <tbl-name>; from being replicated to slaves?
0
votes
1answer
10 views

Does PostgreSQL take time to start streaming replication after restart master?

I set streaming replication in postgresql 9.3. I have one master and 3 slaves and replication works fine. But when i restart the master server and login using postgres database, pg_stat_replication ...
2
votes
1answer
180 views

Bi-directional replication for the same MySQL table

AppA stores/retrieves data from dbA.tableA AppB stores/retrieves data from dbB.tableA tableA definition is the same across these databases. To start with dbB.tableA was copied from dbA.tableA ...
0
votes
1answer
24 views

Consistent backup of large DB --single-transaction

I need to mysqldump a large DB (330 GB) in order to set up a slave for replication. Does --single-transaction allow me to dump the entire DB without shutting mysql down and keeping it down for the ...
4
votes
1answer
317 views

SQL Server 2005 Replication

I am in the process of creating Replication between 2 Remote Servers, server 1 is the Distributor and Publisher and server 2 is the Subscription. server 1 windows 2003 server 192.168.10.1 connected ...
1
vote
1answer
329 views

How to user the Tablediff Utility with Replication Filters

I am using merge replication in SQL 2012. I am trying out the TableDiff utility to show non convergence. I see a problem with this approach though. This is because I am using parameterised filters to ...
1
vote
1answer
28 views

How Much Resources Does the BLACKHOLE Storage Engine Consume?

I'm going to add a MySQL Relay Slave which use BLACKHOLE Storage Engine. The relay slave will just filter some databases binlog to downstream slave. Our MySQL Master generates about 15G a day in ...
0
votes
1answer
43 views

How to generate replication snapshot without locking tables

When I reinitialize subscription and generate new snapshot it locks all tables and makes the database unusable for a very long time (never waited it out). Is there anyway to do this without locking?
0
votes
1answer
85 views

Consolidated realtime mysql backup with master/slave setup or binlog

I have 20+ mysql servers and their have low write requirements. So, I want to see if any way I can replicate the data/binlog from these servers to a single slave so realtime backup purpose. If I ...
0
votes
1answer
52 views

Using non-replicated read/write databases on a MySQL slave server

I have a MySQL slave server that has two databases being replicated from a master. What I'd like to do is add a third database that I will exclude from replication and use as a read/write database. ...
0
votes
1answer
34 views

Postgresql Chained Slaves and Slave Promotion

So I have a setup like Master -> Slave1 -> Slave2. Slave1 replicates from Master and Slave2 replicates from Slave1. If I promote Slave1 to master is it possible for Slave2 to continue replicating from ...
0
votes
1answer
459 views

Merge reports 'You must rerun snapshot because current snapshot files are obsolete', gets caught in Death Loop

We have a very large Merge publication for a data warehouse with some large (.bcp files on the order of 20GB) fact tables that is causing us tremendous trouble. Specifically, we created a publication ...
1
vote
1answer
38 views

MySQL Replication Lag Almost 23 Hours

I came into a new environment where the production DB was running on MySQL 4. Replication is usually about an hour behind but in the last few days it has been well over 24 hours behind. I'm not ...
0
votes
0answers
34 views

Subscription fails with Incorrect syntax near '9'

In my Distributor To Subscriber History I get the following error: Command attempted: 9 (Transaction sequence number: 0x0018E94F0000207A006200000000, Command ID: 59) Error messages: ...
0
votes
1answer
61 views

SQL Server distrb.exe & Logread.exe using huge SQL.txt file in C:\Users\sqlsrvacct\AppData\Local\Temp folder

I have the following situation: SQL server 2008 R2 SP2 I have both the Distribution and Subscription database in this server. LogReader agent and Distribution agent are running in continuous mode the ...
0
votes
1answer
16 views

mysql replication on windows server

How to setup replication(Master/slave) in MySQL 5.6 while both servers are windows based? All the things i have fond are Linux based replication. kindly someone help who experienced replication with ...
0
votes
0answers
35 views

Migrating SQL Server 2008 R2 to SQL Server 2014. What are the importing replication changes?

We currently have SQL Server 2008 R2 on our server. I now have the opportunity to migrate to SQL Server 2014. The database we use isn't large. Migration of data is not a issue. The question I have ...
2
votes
1answer
326 views

All four data nodes in MySQL Cluster in same node group

I am testing MySQL Cluster 7.2. I have two servers, mysql1 and mysql2. I want the management server and two data nodes to run on mysql1 and two other data nodes to run on mysql2. My config.ini file ...
0
votes
1answer
42 views

RAID drives or replicate data?

I have an old Microsoft SQL server that, for financial reasons, I cannot replace until later in the year. The OS, DB and temp files are on one 10k RAID 5 array (I didn't design it) The server is ...
0
votes
2answers
634 views

How to run a cold backup with Linux/tar without shutting down MySQL slave?

I run the following before tar-ing up the data directory: STOP SLAVE; FLUSH TABLES WITH READ LOCK; FLUSH LOGS; However, tar will sometimes complain that the ibdata* and ib_logfiles* files are ...
1
vote
2answers
322 views

SHOW SLAVE HOSTS shows incorrect output

I had used --report-host option in one of my slaves, so that I could see that under SHOW SLAVE HOSTS. Now that server is no longer in use. I have uninstalled that server as well. Unfortunately I still ...
1
vote
0answers
39 views

mongodb replicaset

I am adding a new member in ReplicaSet and it starts initial sync bur after certain point sync break and start resync again.this process continue and never complete its initial sync.so please resolve ...