Replication is the process of sharing any level of information so as to ensure consistency between redundant hardware/software resources to improve reliability, fault-tolerance, and accessibility

learn more… | top users | synonyms

14
votes
0answers
3k views

MySQL 5.1.66 SSL connection error ERROR 2026 (HY000)

UPDATE2 Using WireShark I found out the problem string (I hope I did): 28 | 9.582638 | 192.168.18.128 | 192.168.18.129 | MySQL Response Error 1043 And the error is (according to docs): Error: ...
6
votes
0answers
155 views

9i streams capture doesn't evaluate rules

I have a streams replication set up between two oracle 9.2.0.8 instances as sources and an 11g instance as a destination, processing a small subset of data from each database (let it be one table ...
3
votes
0answers
57 views

Postgres multidisk master replicating to single disk slave

I have an odd situation. I have a postgreSQL database master with multiple large tablespaces divided across 3 physical disks. I am setting up a slave that will be used to offload long, ...
3
votes
0answers
116 views

Replicating databases for local and cloud instances

Forgive me if this is an inappropriate place for this architectural question but I'm not sure where it best fits in the StackExchange family. I have been tasked with developing an online/live auction ...
3
votes
0answers
157 views

Conflict handling, SQL Server 2008 R2 Peer to Peer

I have a Peer to Peer replication topology set up between two SQL Server 2008 R2 servers. I was doing some testing on fault tolerance and conflict handling. I have conflict detection enabled, and ...
3
votes
0answers
108 views

Once in a while synchronization of the independently updated mysql databases problem

I have a production database and a test database running on MySQL with MyISAM and InnoDB tables, which are updated independently. The Production database is updated by system and sometimes by a user. ...
3
votes
0answers
336 views

SQL Server Replication :: Dedicated Distributor Hardware Requirements

Does anyone know any rules of thumb (or better) with regards to hardware requirements for a dedicated distributor server? i.e. Based on estimate metrics (e.g. number of subscribers, publishers, ...
3
votes
0answers
282 views

How unsafe is it to change the data source of repl_distributor on a publisher

I have a long story that I will condense to a few bullet points that leads up to my question Reporting Server (SQL 2008) is distributor/subscriber cluster for a SQL 2000 Transactional Publication ...
3
votes
0answers
81 views

How Much Overhead Does Web Sync Add?

I am running merge replication in SQL2012 using web sync. Has anybody done any experiments to compare the performance of web sync to connecting to replication using a straight TCP/IP connection? ...
3
votes
0answers
388 views

SQL Server 2008 replication scenario

First of all sorry about my english, and most importantly, my database ignorance, I'll do my best ;) Until now, the scenario that I have is as follows: In a server under our LAN, we have a database ...
2
votes
0answers
35 views

How can I avoid breaking Postgres sync replication when building a large index?

We have pairs of Postgres 9.2 servers using synchronous replication. Sometimes rebuilding an index on a large table will break replication due to WAL segments not being kept around long enough. We are ...
2
votes
0answers
48 views

Domain name change of SQL servers involved in replication

I have a situation where client wants to change their domain name of servers hosting SQL Servers(e.g. from AB to CD). I have a transactional replication with updatable subscription configured with 1 ...
2
votes
0answers
205 views

Is there a way to replicate Postgres databases in Amazon RDS between regions?

We have a Postgres RDS instance in the AWS Oregon Region. For some supposed legal reasons, we have to host our client's European data in the Ireland AWS Region, but we need that data synchronized to ...
2
votes
0answers
49 views

Postgres Replication From Different Masters?

I'm getting a Postgres 9.3.3 install sorted out. My application is Drupal (so read/write), but low-traffic, so all application traffic is sent to the primary master. I have two sites (main and ...
2
votes
0answers
69 views

SQL Server 2012 Replication

Please help me out with a problem I am facing. I have a table T. I altered the table to alter the column C from varchar (10) to varchar (100). Now, there is a view V that is schema bound and selects ...
2
votes
0answers
101 views

Replication slave re-reading WAL on restart

I have a standard streaming replication setup going with PostgreSQL 9.1. It works fine. However, if I stop the slave cleanly (to move it or perform other maintenance) and restart it a short time ...
2
votes
0answers
385 views

oracle streams apply: how to get a reason why LCR message was not applied

I've set up bidirectional oracle streams replication (11gR1) using identical scripts on both machines (DB1 and DB2). Although changes from DB1 are being applied to DB2, changes from DB2 to DB1 aren't. ...
2
votes
0answers
60 views

How to Remove Articles Based on User

I am using merge replication on SQL 2012. I have a very large database with a large number of tables. The subscribers are using netbooks. I have a filtering scheme that controls which tables end up ...
2
votes
0answers
258 views

Upgrading Remote Distributor in SQL Server Replication

I'm upgrading my remote distributor from 2005 to 2008r2, it is performing transactional replication only. this is a prerequisite to completing an upgrade of the Publisher to 2008r2. Script ...
2
votes
0answers
345 views

What is causing all of the msrepl_tran_version columns to become out-of-sync between locations in transactional replication setup?

I have been having a recurring issue with transactional replication setups at the firm I work for. We use SQL 2008 R2. Seemingly without warning or any replication errors, all of the ...
2
votes
0answers
2k views

Oracle GoldenGate replication is stuck

I deployed Oracle GoldenGate to integrate many-to-one databases. After initial loading everything works fine. Until recently, some of the replicat seem to stuck and do not proceed to change ...
1
vote
0answers
14 views

Transaction Log won't shrink, DB thinks it is replicating

I've got a database MSSQL2008R2Express DB running Kaspersky Security Center, and I have no idea under what circumstances the install happened, but the database appears to think that it's being ...
1
vote
0answers
21 views

Oracle Data Pump Import with running advanced replication

In our system we have a running advanced replication between two databases(11g release 2) and want to use pump import to import a backup on one site. However the imported data is not replicated to the ...
1
vote
0answers
4 views

PostgreSQL Replication delay debugging

I've got a cluster of 9.1 servers running streaming replication and using WAL-E based log shipping for when that falls behind. Generally speaking it's a pretty solid setup and does not fall behind, ...
1
vote
0answers
75 views

MariaDB Galera Cluster - nodes fail to start

This is a new installation (fresh VM and MariaDB install). For some reason, the nodes are having trouble joining the master server. The master server would pause at Preparing binlog files for ...
1
vote
0answers
27 views

How to keep the sync active with Bucardo

I have a master-master sync setup between 3 nodes or 3 different host machines using bucardo. All works good. However when one of the database or a host is not reachable or goes down for some reason, ...
1
vote
0answers
27 views

MySQL Cluster Master Master Replication - broken Leg

I have two MySQL Clusters which normally operate with Master - Master Replication between two of their nodes. Site 1 gets the majority of the write traffic, with Site 2 writing small amounts of ...
1
vote
0answers
76 views

MySQL master slave replication not working

I had MySQL master slave running and working fine but suddenly it stopped. I don't know which commands have been executed but now replication is not working. I am very new to MySQL can anyone help me? ...
1
vote
0answers
32 views

How can I correct MySQL replication while using federated tables?

This is an overview of what I have going I have 2 server A (10.0.4.22) AND B (10.0.4.29) A is a replication of B and B is a replication of A (yes it is a ring replication) ON A I have 2 table uat and ...
1
vote
0answers
49 views

Replica failed with error mongo db

I am running mongo sharded cluster with two replica set as shards. One set is working fine but replica secondary on other replica set is not working. When ever i restart it it gives me this error and ...
1
vote
0answers
140 views

Replication of a remote MySQL database to local MySQL database

I'm the developer of my employers corporate private website, a HTML5/PHP/CSS powered site for company reports etc. The site, hosted on a shared hosting package, connects to a remote read-only MySQL DB ...
1
vote
0answers
90 views

sqlcmd returning NUL instead of NULL for tinyint column

sqlcmd -E -d MyDatabase -Q "sp_helpsubscription" -s "," -o file.csv -W -u Column 23 which is suppose to be a tinyint (subscriber_type) is output as NUL instead of NULL when the value is NULL. I ...
1
vote
0answers
69 views

mongodb replicaset

I am adding a new member in ReplicaSet and it starts initial sync bur after certain point sync break and start resync again.this process continue and never complete its initial sync.so please resolve ...
1
vote
0answers
171 views

Error to connect mongos when trying to create replicated sharded cluster

I'm trying to create an replicated sharded cluster in mongodb. Initially I've created two shards and there are a replica set with three members in each shard. And all the shards and replicasets run in ...
1
vote
0answers
42 views

Sync/Replication of 2 Oracle Databases with NetApp storage

I am working on a high availability setup of Oracle Enterprise Manager. I need the back-end repository replicated (preferably in real time, or something close) to another repository, in which I could ...
1
vote
0answers
87 views

“Replicate” Table structures with sp_addscriptexec

In our customers environment is a massive central server (running SQL Server Enterprise 2008R2) and some distributed PCs (running SQL Server Standard 2008R2). The central server has a replication for ...
1
vote
0answers
63 views

MySQL replication of single DB to same server

I have a DB Server running CentOS 6.4 and MySQL 5.5 from RPMs (not source). I have dozens of databases but one of them is being hit quite hard with large selects which locks out other updates which ...
1
vote
0answers
34 views

replication error involving ignore-db

I have simple master/slave replication set up between two servers. The master has several DB's I wish not to replicate at this time, in fact there is only DB I am trying to replicate. I have several ...
1
vote
0answers
39 views

Sybase Replication rs_subcmp can ignore length?

I want to use rs_subcmp utility to sync one table. I've created a config file but I got the following error: Length mismatch for column #9 between the primary (50) and the replicate (100). ...
1
vote
0answers
89 views

PostgreSQL 9.3 slaves don't recognize hstore as a type

I am using the postgres built in replication with two slave nodes and a single master. On the master node (as well as the slaves) the hstore extension is installed. But whenever a query using hstore ...
1
vote
0answers
122 views

Data Corruption on base backups created with wal-e?

I have streaming replication setup on Postgresql 9.1 with two machines on AWS EC2. The master has a cron job that does a daily base backup using the wal-e tool and uploading it to Amazon's S3 storage. ...
1
vote
0answers
17 views

Is it possible for unique key to break master-master replication in mysql?

I have a master-master mysql setup with 2 servers running the exact same application making writes to such a table: CREATE TABLE `metric` ( `id` bigint(20) unsigned NOT NULL AUTO_INCREMENT, ...
1
vote
0answers
128 views

Master and slave tables with different character sets - will replication break?

We have some huge tables in our MySQL 5.6 database that have latin-1 as their character set, and want to convert them all to UTF-8 (along with converting the database's global character set). The ...
1
vote
0answers
26 views

The @article parameter value must be 'all' for immediate_sync publications

I have a publication of 4 tables and many subscribers (transactional push replication), most of them being interested by one of those 4 tables. Everything is working fine as long as I create the ...
1
vote
0answers
70 views

SQL Server replication - recommendations for stability

We have two SQL Server 2008R2 Standard servers, and we've set up replication of a single database between them. The replication is about as simple as it can get - it's a transactional replication from ...
1
vote
0answers
277 views

Postgres database zero down time production deployment

I need some idea about how I can deploy a financial application in production environment using PostgreSQL DB with zero down time. I have two servers in Master-Slave design. Currently I am giving ...
1
vote
0answers
83 views

Data replication vs parallel shard query

I'm not a DBA, and I'm wondering how a SQL Server database can scale to fit the needs of a social network. I'm not interested in NOSQL, and I understand that caching plays an important role in ...
1
vote
0answers
67 views

Replication topology advice - central subscriber

I'm seeking guidance and advice about how to set up replication in MSSQL to deal with the following criteria. We have a central server hosted at a data center - this is where our web app is located. ...
1
vote
0answers
52 views

Mysql Replication Master/Slave and Master/Master

Looking for some insight and opinions from some DBAs, as I've been tasked to look into using Master/Master replication for a single table in a database. We currently run mysql replication using a ...
1
vote
0answers
33 views

Data mirroring suggestions

On my test environment, I have a SQL 2012 2-node physical cluster that accesses a common iSCSI storage on a separate Windows Server 2012 box. What options are there if I want to backup this storage to ...