-1
votes
0answers
13 views

I'm trying to make a stored procedure to validate the input parameter [duplicate]

I want to make a stored procedure to validate if a input integer is maximum 15 digits and first digit is not 0. And I have this for now: CREATE PROCEDURE usp_verify_phone_numbers (@phone_number INT) ...
0
votes
1answer
42 views

Select complete next row based on the current row

Hi i have a complicated condition. I have a table lets say 'Test' ID Partner Type Amount 143854 CSTC Purchase -0.81 144029 CSTC Purchase -0.69 144030 CSTC Purchase ...
0
votes
2answers
84 views

Tsql Query speed slow due to Or within where clause, causing index scan instead of seek

I have been working on making this query work more efficiently. I found that the number of Ors within the where clause are the biggest problem within this query. This query sits in a stored ...
0
votes
1answer
36 views

Update specific records of table based on subquery's output (sql server)

have this query which produce below output : select sec.site,sec.Name,sec.Freq from ( select Name from sec group by name having count(Freq) > 3)as dt inner join sec on dt.Name = sec.Name where ...
1
vote
2answers
96 views

How to add an “INCLUDE” part in an Index Created as a part of CONSTRAINT

I am going through the execution plan of a tsql query. There is a key LookUp (Clustered) in the plan. To avoid this Key LookUp, I tried to Include a column (Status_Ind) to The Index (The Index ...
0
votes
0answers
10 views

Curious Regarding filtering behaviour and performance of where condition

So i have completed the clean up of SQL code that involves four set of queries that partially do the same filtering in where condition , while the rest of the part do their own task specific to each ...
0
votes
0answers
42 views

LIKE or CHARINDEX to check String Contains a Substring [duplicate]

To check a string contains a sub string or not we can use [LIKE] or [CHARINDEX]. I know that like uses indexing in case we have name%.(while %name% may not use index) .Also charindex does not use ...
2
votes
1answer
83 views

Converting Cursor based filtering logic to CTE based

I have a cursor that runs long for about minutes which I was able to reduce to run in seconds using a CTE (Common Table Expressions). The result set was identical until there was given a condition ...
-1
votes
2answers
106 views

Remove a character from a records enclosed between double quotes

I have a table in which every row have data like: 0150566115,"HEALTH 401K","IC,ON","ICON HEALTH 401K",,,1,08/21/2014 What I want is to remove every comma (,) that is enclosed between double quotes ...
1
vote
3answers
77 views

How to query for records based on most recent version

I have the following table structure ID, ORDERNUMBER, DATE, STATUS 1, 1, 1-1-01, proposal 2, 1, 1-2-01, proposal 3, 1, 1-3-01, active 4, 2, 1-1-02, proposal 5, 2, 1-2-02, cancelled 6, 3, 1-1-03, ...
-3
votes
2answers
107 views

Inserting data based on different conditons

Though , i put my efforts in making question easy to understand , but i still dnt know whats going wrong . Anyways , im trying to make it more compact I have below table now only : In column number ...
1
vote
1answer
43 views

Group by alternative [closed]

I have a table , that has a generic set of actions for EVERY user. However if there is a user that needs to have a unique action, that replaces an existing action, then in my query, I want to ...
0
votes
1answer
36 views

Script to Add a Job to a SQL Server DB

I want to add a job to my DB to make a back up weekly but i want to do it from an script, i've serched and with what i found i made this: CREATE SCHEMA job go CREATE PROC BACKUPS @dir varchar(max) AS ...
5
votes
1answer
210 views

Splitting a csv column from select query into multiple columns

I have a stored procedure SELECT [ShipWorks].[dbo].[OrderItem].[Code] AS Code, CASE WHEN (LEN(ISNULL(MAX([ShipWorks].[dbo].[OrderItem].[Location]),'')) = 1) THEN ...
2
votes
2answers
249 views

How do I include nulls during comparisons in SQL Server?

So basically in SQL Server a NULL means there is no value and thus can't be compared which returns some unexpected results. For example, the following query doesn't return rows where value IS NULL ...
0
votes
2answers
131 views

Long running simple query SQL Server 2008 R2 [closed]

I have a very simple query running in a SQL Server 2008 R2 instance: SELECT TOP 10 * FROM messages m INNER JOIN recipients r ON m.id = r.id WHERE m.timeStamp > '2014-07-14T00:00:00.000' AND ...
7
votes
3answers
225 views

Optimize select on subquery with COALESCE(…)

I have a large view that I use from within an application. I think I've narrowed down my performance problem, but I'm unsure how to fix it. A simplified version of the view looks like this: SELECT ...
0
votes
1answer
31 views

Return Parents With Only One Child

In a Parent and Child relationship, I'm trying to return Parents that only have one Child and a where clause applied to the only child firstname like 'tom' t-sql pseudo: parents with only one child ...
4
votes
1answer
112 views

Sargable Queries

Very simple question I hope, I'm currently having some scripts I inherited into my project reviewed by the database admins. This has never been done before apparently and lots of issues are being ...
-1
votes
1answer
100 views

Divide single column value into multiple column depending upon the bit value of another column [closed]

I have a table containing following fields. Id varchar(5), TranDate date, TranType bit, TranAmount decimal(15,3) My table looks like this: Id TranDate TranType TranAmount ...
1
vote
1answer
55 views

set date value based on other row values

Sorry for the Header, I can't find the right way to describe what I want, possibly the reason why I can't get a solution by googling :) ... Here my problem: I've got a table with the following ...
2
votes
1answer
81 views

TSQL- Column DataType Length

Can anyone please explain me the below one. I used the below query in getting the table columns info, but the max length seems to be x*2 of the actual col length. I mean if I have a col with datatype ...
0
votes
1answer
49 views

Join reorders results [duplicate]

Is there any particular reason why adding an additional join to an ordered table would reorder the result set? Using a left join on the existing result set table-valued function is similar to below ...
-3
votes
2answers
146 views

how to solve slow running sub query TSQL

I have a problem with a slow running query. I have analysed the query with the sql server profiler but I can't seem to find a good solution. I did find why it is running slow. If ask the full ...
0
votes
2answers
238 views

NULL value returned when concatenating a string in SQL while loop! [closed]

I'm trying concatenate a string in a while loop, but it only returns NULL. Is there something I'm missing? declare @o int = 10000000/1000000; declare @i int = 0; declare @s nvarchar(200); while @i ...
1
vote
1answer
178 views

How to use COALESCE with multiple rows and without preceding comma?

I'm trying to achieve the following: California | Los Angeles, San Francisco, Sacramento Florida | Jacksonville, Miami Unfortunately, I'm getting ",Los Angeles, San Francisco, Sacramento, ...
-1
votes
1answer
61 views

combining two CTE in a single query

Here i have two CTE and i need to select values from these two CTE as a single query. I can able to select values from a single CTE at a time but i dont know like how to merge these two CTE and select ...
0
votes
2answers
119 views

Run “USE” with linked server alternatives

I am using SQL server linked servers and find some difficulties while running queries. Below is the actual query. USe testdb SELECT 'Identitiy property OFF' where COLUMNPROPERTY( ...
0
votes
1answer
105 views

getting error incorrect syntax near @certificate

I have created a certificate and now I want to remove certificate signature and drop the certificate. When I supply the certificate name directly it is working but when I'm making use of local ...
6
votes
5answers
3k views

Why can't I use a CASE statement to see if a column exists and not SELECT from it?

Why does something like this not work? SELECT CASE WHEN NULLIF(COL_LENGTH('Customers', 'Somecol'), '') IS NULL THEN NULL ELSE Somecol END AS MyTest FROM Customers; I am just checking if the column ...
0
votes
1answer
52 views

Right outer join seems to not work because of where clause filter

I have the following query, I need to modify it, so that it gives me the result for originDocForCurrency.id = 68 if there is no matching for commission.referenzid = 68. I tried the RIGHT OUTER JOIN ON ...
0
votes
1answer
129 views

How to restore Network backup to Network Path in SQL Server 2005?

I am trying to restore network backup file to network path.. is there any way to do it? I am using SQL Server 2005 and code.... RESTORE DATABASE DB_NAme FROM DISK = ...
0
votes
3answers
112 views

How to improve this query performance by indexing properly?

I have following select query, and I need to improve the performance of this query. Can anyone suggest me how to convert the clustered index scan to index seek? DECLARE @now DateTime; DECLARE ...
0
votes
2answers
127 views

Remove a period if it is the first character in a varchar column

I am migrating data from an old system into a new system I am building and have found someone is doing a bad practice of adding a period to the start of some people's names to make them appear first ...
3
votes
1answer
79 views

What happens when you create the primary key of a table on a different filegroup?

Creating a table on a different filegroup is absolutely no problem when using Sql Server. create table common.test ( id int, CONSTRAINT [pk_test] PRIMARY KEY CLUSTERED (id ASC) ON ...
10
votes
1answer
774 views

How can I make a query take a specific amount of time?

I am testing a monitoring application against a SQL Server 2000 instance. How can I write a T-SQL query that takes an amount of time that I specify? For example, most scripting languages have ...
5
votes
1answer
362 views

Optimize where clause using dates

I'm trying to optimize several queries that all use a similar pattern on one of the WHERE clauses: AND (DATEADD(DAY , ISNULL(a.[due_days], 30) + 30 , [dbo].[CalcDate]([type], ...
3
votes
1answer
69 views

Table A triggers an insert onto Table B, Table B triggers an insert onto Table A, what happens?

Assume I have two tables, table A and table B. Table A has an insert trigger that inserts a record into Table B. Table B has an insert trigger that inserts a record into Table A. What would happen in ...
1
vote
2answers
225 views

Dynamically REVOKE CONNECT FROM guest in SQL Server 2005

I wrote this simplistic script (I'm not very familiar with TSQL and dynamic SQL) to revoke all connections from guest accounts: DECLARE @database_id int, @database_name nvarchar(100); DECLARE ...
0
votes
0answers
84 views

Name for SELECT equivalent of UPSERT

UPSERT means INSERT and\or UPDATE, is there a standard name for a sproc that will INSERT if necessary and then SELECT? e.g. I want to get the IS of a row that matches fields and give me the ID, if ...
0
votes
1answer
81 views

Nightly reload of tables from a linked server

I have a number of tables that need to be reloaded nightly from a linked server. My current method of doing this is to create a nightly job to pull the data using something like the following: ...
4
votes
2answers
256 views

Update Statement takes forever to complete [closed]

I have table around 1250000 records, and 80 columns Table Structure CREATE TABLE [dbo].[Table] ( [Column1] [int] IDENTITY(1, 1) NOT FOR REPLICATION NOT NULL, [Column2] [int] NULL, [Column3] [int] ...
0
votes
1answer
63 views

How to retrieve whether database has any tables?

Knowing to use SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_TYPE='BASE TABLE' to query for a list of tables, I'm currently finding no way to retrieve a list of non-system tables only. I.e. ...
11
votes
1answer
2k views

GO After every T-SQL statement

What is the reasoning behind using the GO statement after every SQL statement? I understand that GO signals the end of batch and/or allows the reputation of statements but what advantage does it have ...
1
vote
0answers
210 views

SQL command in stored procedure continue on error

To perform Checkdb on all database of server i am using a stored procedure which loops over a view which contains list of databases in server and the stored procedure performs checkdb on all databases ...
1
vote
1answer
35 views

Case when missing line logic

I have a case when statement in a extract query which doesn't seem to be returning what i'm expecting DECLARE @Val1 int, @Val2 int,@Val3 int, @Val4 int, @Val5 int SELECT @Val1 = 5 , @Val2= 2,@Val3= ...
5
votes
1answer
463 views

Use of FROM keyword on DELETE statement

The BOL and many other sources point out: FROM Is an optional keyword that can be used between the DELETE keyword and the target table_or_view_name, or rowset_function_limited. I'm used to ...
2
votes
2answers
244 views

View scripts ran by a specific user?

I read in a stackoverflow post that you can restore scripts from the past 24 hours by using this query: Use <database> SELECT execquery.last_execution_time AS [Date Time], execsql.text AS ...
2
votes
1answer
104 views

Getting each status change in a table

I have a table that holds status changes per item. The item can go in and out of a status multiple times. ItemTable (ItemId int, Status varchar(50), DateOfChange date) I need to pull the date of ...
2
votes
1answer
616 views

View with parameters in Sybase SQL Anywhere

A view with Sybase engine cannot take parameters. Is there a way to do this?