5 I only wanted to changed the spelling of wait_timeout, but it made me change at least 6 characters
source | link

mysqldmysqld will timeout DB Connectionsdatabase connections based on two(2) server options:

Both are 2880028,800 seconds (8 hours) by default.

You can set these options in /etc/my.cnf/etc/my.cnf

If your connections are persistent (opened via mysql_pconnectmysql_pconnect) you could lower these numbers to something reasonable like 600 (10 minminutes) or even 60 (1 minminute). Or, if your app works just fine, you can leave the default. This is up to you.

You must set these as follows in my.cnf my.cnf (takes effect after mysql restartmysqld is restarted):

[mysqld]
interactive_timeout=180
wait_timeout=180

If you do not want to restart mysql, then run these two commands:

SET GLOBAL interactive_timeout = 180;
SET GLOBAL wait_timeout = 180;

This will not close the connections already open. This will cause new connections to close in 180 secseconds.

mysqld will timeout DB Connections based on two(2) server options:

Both are 28800 seconds (8 hours) by default.

You can set these options in /etc/my.cnf

If your connections are persistent (opened via mysql_pconnect) you could lower these numbers to something reasonable like 600 (10 min) or even 60 (1 min). Or, if your app works just fine, you can leave the default. This is up to you.

You must set these as follows in my.cnf (takes effect after mysql restart):

[mysqld]
interactive_timeout=180
wait_timeout=180

If you do not want to restart mysql, then run these two commands:

SET GLOBAL interactive_timeout = 180;
SET GLOBAL wait_timeout = 180;

This will not close the connections already open. This will cause new connections to close in 180 sec.

mysqld will timeout database connections based on two server options:

Both are 28,800 seconds (8 hours) by default.

You can set these options in /etc/my.cnf

If your connections are persistent (opened via mysql_pconnect) you could lower these numbers to something reasonable like 600 (10 minutes) or even 60 (1 minute). Or, if your app works just fine, you can leave the default. This is up to you.

You must set these as follows in my.cnf (takes effect after mysqld is restarted):

[mysqld]
interactive_timeout=180
wait_timeout=180

If you do not want to restart mysql, then run these two commands:

SET GLOBAL interactive_timeout = 180;
SET GLOBAL wait_timeout = 180;

This will not close the connections already open. This will cause new connections to close in 180 seconds.

4 Added mysql documentation links for interactive_timeout & wait_timetout
source | link

mysqld will timeout DB Connections based on two(2) server options:

Both are 28800 seconds (8 hours) by default.

You can set these options in /etc/my.cnf

If your connections are persistent (opened via mysql_pconnect) you could lower these numbers to something reasonable like 600 (10 min) or even 60 (1 min). Or, if your app works just fine, you can leave the default. This is up to you.

You must set these as follows in my.cnf (takes effect after mysql restart):

[mysqld]
interactive_timeout=180
wait_timeout=180

If you do not want to restart mysql, then run these two commands:

SET GLOBAL interactive_timeout = 180;
SET GLOBAL wait_timeout = 180;

This will not close the connections already open. This will cause new connections to close in 180 sec.

mysqld will timeout DB Connections based on two(2) server options:

  • interactive_timeout
  • wait_timetout

Both are 28800 seconds (8 hours) by default.

You can set these options in /etc/my.cnf

If your connections are persistent (opened via mysql_pconnect) you could lower these numbers to something reasonable like 600 (10 min) or even 60 (1 min). Or, if your app works just fine, you can leave the default. This is up to you.

You must set these as follows in my.cnf (takes effect after mysql restart):

[mysqld]
interactive_timeout=180
wait_timeout=180

If you do not want to restart mysql, then run these two commands:

SET GLOBAL interactive_timeout = 180;
SET GLOBAL wait_timeout = 180;

This will not close the connections already open. This will cause new connections to close in 180 sec.

mysqld will timeout DB Connections based on two(2) server options:

Both are 28800 seconds (8 hours) by default.

You can set these options in /etc/my.cnf

If your connections are persistent (opened via mysql_pconnect) you could lower these numbers to something reasonable like 600 (10 min) or even 60 (1 min). Or, if your app works just fine, you can leave the default. This is up to you.

You must set these as follows in my.cnf (takes effect after mysql restart):

[mysqld]
interactive_timeout=180
wait_timeout=180

If you do not want to restart mysql, then run these two commands:

SET GLOBAL interactive_timeout = 180;
SET GLOBAL wait_timeout = 180;

This will not close the connections already open. This will cause new connections to close in 180 sec.

3 Add proper formmating to code samples
source | link

mysqld will timeout DB Connections based on two(2) server options:

interactive_timeout
wait_timetout

  • interactive_timeout
  • wait_timetout

Both are 28800 seconds (8 hours) by default.

You can set these options in /etc/my.cnf

If your connections are persistent (opened via mysql_pconnect) you could lower these numbers to something reasonable like 600 (10 min) or even 60 (1 min). Or, if your app works just fine, you can leave the default. This is up to you.

You must set these as follows in my.cnf (takes effect after mysql restart):

interactive_timeout=180
wait_timeout=180

[mysqld]
interactive_timeout=180
wait_timeout=180

If you do not want to restart mysql, then run these two commands:

SET GLOBAL interactive_timeout = 180;
SET GLOBAL wait_timeout = 180;

SET GLOBAL interactive_timeout = 180;
SET GLOBAL wait_timeout = 180;

This will not close the connections already open. This will cause new connections to close in 180 sec.

mysqld will timeout DB Connections based on two(2) server options:

interactive_timeout
wait_timetout

Both are 28800 seconds (8 hours) by default.

You can set these options in /etc/my.cnf

If your connections are persistent (opened via mysql_pconnect) you could lower these numbers to something reasonable like 600 (10 min) or even 60 (1 min). Or, if your app works just fine, you can leave the default. This is up to you.

You must set these as follows in my.cnf (takes effect after mysql restart):

interactive_timeout=180
wait_timeout=180

If you do not want to restart mysql, then run these two commands:

SET GLOBAL interactive_timeout = 180;
SET GLOBAL wait_timeout = 180;

This will not close the connections already open. This will cause new connections to close in 180 sec.

mysqld will timeout DB Connections based on two(2) server options:

  • interactive_timeout
  • wait_timetout

Both are 28800 seconds (8 hours) by default.

You can set these options in /etc/my.cnf

If your connections are persistent (opened via mysql_pconnect) you could lower these numbers to something reasonable like 600 (10 min) or even 60 (1 min). Or, if your app works just fine, you can leave the default. This is up to you.

You must set these as follows in my.cnf (takes effect after mysql restart):

[mysqld]
interactive_timeout=180
wait_timeout=180

If you do not want to restart mysql, then run these two commands:

SET GLOBAL interactive_timeout = 180;
SET GLOBAL wait_timeout = 180;

This will not close the connections already open. This will cause new connections to close in 180 sec.

2 added 343 characters in body; added 37 characters in body
source | link
1
source | link