Skip to main content
Database Administrators

Return to Question

Tweeted twitter.com/StackDBAs/status/1111055464895262724
add the mysql config files
Source Link
bob
bob
  • 51
  • 1
  • 6

Here is the part of//later edit Here are my 2 mysql.ini for both DBs:

master1:

# The MySQL server
[wampmysqld]
socket      = /tmp/mysql.sock
key_buffer = 16M
max_allowed_packet = 1M

sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
basedir=c:/wamp/bin/mysql/mysql5.6.12
log-error=c:/wamp/logs/mysql.log
datadir=c:/wamp/bin/mysql/mysql5.6.12/data

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
# 
#skip-networking

# Disable Federated by default
skip-federated

# Replication Master Server (default)
# binary logging is required for replication
#log-bin=mysql-bin

# binary logging format - mixed recommended
binlog_format=mixed

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id   = 1
log_bin //= binlog
log_bin_index = binlogindex
relay_log = relaylog
relay_log_index = relaylogindex
log_slave_updates = 1

auto-increment-increment = 2
auto-increment-offset = 1

sync-binlog = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the master's port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
#    MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the otherfirst dbtime (even unsuccessfully, for example
#    if you mistyped the password in master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables' values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Point the following paths to different dedicated disks
#tmpdir     = /tmp/     
#log-update     = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = C:\mysql\data/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = C:\mysql\data/
#innodb_log_arch_dir = C:\mysql\data/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 1024M
innodb_additional_mem_pool_size = 20M
bulk_insert_buffer_size = 256M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

[mysqld]
innodb_file_per_table
max_connections = 300
innodb_read_io_threads = 64
innodb_thread_concurrency = 0
innodb_write_io_threads = 64
sync-binlog = 1
sync-relay-log = 1
sync-relay-log-info = 1
sync-master-info = 1

master2:

# The MySQL server
[wampmysqld]
socket      = /tmp/mysql.sock
key_buffer = 16M
max_allowed_packet = 1M

sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
basedir=c:/wamp/bin/mysql/mysql5.6.12
log-error=c:/wamp/logs/mysql.log
datadir=c:/wamp/bin/mysql/mysql5.6.12/data

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
# 
#skip-networking

# Disable Federated by default
skip-federated

# Replication Master Server (default)
# binary logging is required for replication
#log-bin=mysql-bin

# binary logging format - mixed recommended
binlog_format=mixed

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id   = 2
log_bin = binlog
log_bin_index = binlogindex
relay_log = relaylog
relay_log_index = relaylogindex
log_slave_updates = 1 

auto-increment-increment = 2
auto-increment-offset = 2

sync-binlog = 1

# //Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the master's port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
#    MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the first time (even unsuccessfully, for example
#    if you mistyped the otherpassword dbin master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables' values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Point the following paths to different dedicated disks
#tmpdir     = /tmp/     
#log-update     = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = C:\mysql\data/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = C:\mysql\data/
#innodb_log_arch_dir = C:\mysql\data/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 1024M
innodb_additional_mem_pool_size = 20M
bulk_insert_buffer_size = 256M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50


[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

[mysqld]
innodb_file_per_table
max_connections = 300
innodb_read_io_threads = 64
innodb_thread_concurrency = 0
innodb_write_io_threads = 64
sync-binlog = 1
sync-relay-log = 1
sync-relay-log-info = 1
sync-master-info = 1

Here is the part of my.ini for both DBs:

server-id   = 1 //2, for the other db
log_slave_updates = 1
auto-increment-increment = 2
auto-increment-offset = 1 //2, for the other db

innodb_buffer_pool_size = 1024M
innodb_additional_mem_pool_size = 20M
bulk_insert_buffer_size = 256M

[mysqld]
innodb_file_per_table
max_connections = 300
innodb_read_io_threads = 64
innodb_thread_concurrency = 0
innodb_write_io_threads = 64

//later edit Here are my 2 mysql.ini

master1:

# The MySQL server
[wampmysqld]
socket      = /tmp/mysql.sock
key_buffer = 16M
max_allowed_packet = 1M

sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
basedir=c:/wamp/bin/mysql/mysql5.6.12
log-error=c:/wamp/logs/mysql.log
datadir=c:/wamp/bin/mysql/mysql5.6.12/data

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
# 
#skip-networking

# Disable Federated by default
skip-federated

# Replication Master Server (default)
# binary logging is required for replication
#log-bin=mysql-bin

# binary logging format - mixed recommended
binlog_format=mixed

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id   = 1
log_bin = binlog
log_bin_index = binlogindex
relay_log = relaylog
relay_log_index = relaylogindex
log_slave_updates = 1

auto-increment-increment = 2
auto-increment-offset = 1

sync-binlog = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the master's port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
#    MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the first time (even unsuccessfully, for example
#    if you mistyped the password in master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables' values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Point the following paths to different dedicated disks
#tmpdir     = /tmp/     
#log-update     = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = C:\mysql\data/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = C:\mysql\data/
#innodb_log_arch_dir = C:\mysql\data/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 1024M
innodb_additional_mem_pool_size = 20M
bulk_insert_buffer_size = 256M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

[mysqld]
innodb_file_per_table
max_connections = 300
innodb_read_io_threads = 64
innodb_thread_concurrency = 0
innodb_write_io_threads = 64
sync-binlog = 1
sync-relay-log = 1
sync-relay-log-info = 1
sync-master-info = 1

master2:

# The MySQL server
[wampmysqld]
socket      = /tmp/mysql.sock
key_buffer = 16M
max_allowed_packet = 1M

sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
basedir=c:/wamp/bin/mysql/mysql5.6.12
log-error=c:/wamp/logs/mysql.log
datadir=c:/wamp/bin/mysql/mysql5.6.12/data

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
# 
#skip-networking

# Disable Federated by default
skip-federated

# Replication Master Server (default)
# binary logging is required for replication
#log-bin=mysql-bin

# binary logging format - mixed recommended
binlog_format=mixed

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id   = 2
log_bin = binlog
log_bin_index = binlogindex
relay_log = relaylog
relay_log_index = relaylogindex
log_slave_updates = 1 

auto-increment-increment = 2
auto-increment-offset = 2

sync-binlog = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the master's port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
#    MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the first time (even unsuccessfully, for example
#    if you mistyped the password in master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables' values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Point the following paths to different dedicated disks
#tmpdir     = /tmp/     
#log-update     = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = C:\mysql\data/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = C:\mysql\data/
#innodb_log_arch_dir = C:\mysql\data/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 1024M
innodb_additional_mem_pool_size = 20M
bulk_insert_buffer_size = 256M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50


[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

[mysqld]
innodb_file_per_table
max_connections = 300
innodb_read_io_threads = 64
innodb_thread_concurrency = 0
innodb_write_io_threads = 64
sync-binlog = 1
sync-relay-log = 1
sync-relay-log-info = 1
sync-master-info = 1
Source Link
bob
bob
  • 51
  • 1
  • 6

MySQL Master-Master Replication not syncing

SETUP:

I have a WAMP MySQL Master-Master replication setup on 2 machines with sync_binlog=1 for safety. Machine config: Windows Azure Standard 2: 2 core, 4GB RAM, Windows Server 2008, MySQL 5.6.12, WAMP 2.4

PROBLEM:

If i start the slaves for the first 5-10 minutes everything is ok. After this time my inserts\updates will never sync in both DBs. If i check "show slave status\G":

Slave_IO_State: Waiting for master to send event
Last_Errno: 0
Last_Error:
Last_IO_Errno: 0
Last_IO_Error:
Last_SQL_Errno: 0
Last_SQL_Error:
SQL_Delay: 0
SQL_Remaining_Delay: NULL
Slave_SQL_Running_State: Slave has read all relay log; waiting for the slave I/O thread to update it

If i do "stop slave\start slave" the machines sync.

QUESTION:

What is the proper way to solve this, or which param am i setting wrong?

Here is the part of my.ini for both DBs:

server-id   = 1 //2, for the other db
log_slave_updates = 1
auto-increment-increment = 2
auto-increment-offset = 1 //2, for the other db

innodb_buffer_pool_size = 1024M
innodb_additional_mem_pool_size = 20M
bulk_insert_buffer_size = 256M

[mysqld]
innodb_file_per_table
max_connections = 300
innodb_read_io_threads = 64
innodb_thread_concurrency = 0
innodb_write_io_threads = 64