Questions tagged [master-slave-replication]

The tag has no usage guidance.

Filter by
Sorted by
Tagged with
0
votes
1answer
109 views

Row based replication on slave where as statement based on Master

We have a master slave setup of MYSQL 5.6. Master and slave runs SBR replication where as slave is not writing binlogs. We need to enable binlogs on the Slave server but we want the binlogs to be in ...
0
votes
1answer
123 views

Restore server instance using logical backup and wal files

Is it possible to restore a database instance using logical backup and wal files? A senior SQL Server DBA asked me to implement below scenario in PostgreSQL took the logical backup using pg_dumpall ...
0
votes
1answer
93 views

Do i need streaming replication slots as many of replicas in postgres?

Correct me if I am wrong but I’m thinking that if I have 4 different read only replica servers I need 4 streaming replication slots, one for each of them? Or all of them can you use one?
0
votes
1answer
143 views

MariaDB | Sync Master with Slave in another Datacenter

We have a web application hosted on a dedicated server at Datacenter A. I am in the process of setting up a disaster recovery protocol and am considering the following. My current plan is to purchase ...
0
votes
1answer
477 views

Too much data queued in replication slots

Periodically we run a batch process that sequentially backups (delete, vacuum and later remote storage in AWS' S3) for a set of about 20.000 tables with the following shell script: #!/bin/bash ...
0
votes
1answer
416 views

Can drbd be used for mongodb replication or active/passive setting?

From this guide we know DRBD can used for PostgreSQL Active/Passive setting: https://www.howtoforge.com/how-to-set-up-an-active-passive-postgresql-cluster-with-pacemaker-corosync-and-drbd-centos-5.5-...
0
votes
1answer
49 views

Can I edit queued MySQL binary logs for replication?

I have a simple Master-Slave replication set up, but Slave keeps falling behind do to what appears to be a simple checkout system. Master can keep up because it runs multi-threaded, but since the ...
0
votes
1answer
243 views

What sequence when changing the master MySQL server, but not IP?

I change the replica to the master server. But the IP master remains the same. * The second replica itself will continue to work, without changing the settings? * On the old master, just change ...
0
votes
1answer
42 views

Which server to be master and which one slave database?

I have an application for which I‌ want to set up a master/slave mysql database, because the current db struggles under high load. I have two different servers for db replication. Lets call them A ...
0
votes
1answer
302 views

Understanding Simple MongoDB Replication Works

I've been using MongoDB (3.2.9) replication for years and barely know the detail how it works. My Stack is Rails 4.2.5 with Mongoid 5.1.3. I've 3 database servers, let's call them A (Primary), B (...
0
votes
1answer
391 views

How to create a multiple mysql replication

My question is about to create a mysql replication server. Here i have multiple slaves and i want replicate all respective database into multiple master server . Que is that how could i set multiple ...
0
votes
0answers
13 views

question about MySQL5.7 server(Master) and a MariaDB 10.3(Slave)

I have question: I want to install a MySQL5.7 server(Master) and a MariaDB 10.3(Slave).Replay SQL(select and update) on the slave server after SQL running on the master server.get slow sql log on ...
0
votes
0answers
13 views

Calculating Total Time Taken to Replicate

I wanted to know whether there are any open source tools or in built functions for generating replication metrics. Basically i wanted to calculate the time difference between changes in the Master vs ...
0
votes
0answers
22 views

Alter Table operations blocks replication in MySQL

We are using Amazon Web Service's MySQL 5.7.26 with 4 read-only replicas. After some Alter Table operations we have found that the replication stops working. The symtoms are great replica lag that is ...
0
votes
2answers
29 views

MySql replication failed with error 1236 data position > file size with relay-bin file not increasing

My slave machine reset and now on SLAVE SHOW STATUS\G I have the error: Last_IO_Error: Got fatal error 1236 from master when reading data from binary log: 'Client requested master to start ...
0
votes
1answer
37 views

Renaming multiple databases on a MySQL slave

I have 4 mysql databases that I'm replicating from a master to a slave. In the past, I have renamed one of them because the slave is also a dev server where it has a dev version of that schema with ...
0
votes
0answers
22 views

create backup on mysql master-slave

I have MySQL version 5.7 with a master-slave configuration. but I'm confused to make a backup cron. Is there a way to do a backup while remaining safe to master-slave? I heard that using mysqldump is ...
0
votes
0answers
11 views

Does replica config parameter affect primary/master RDS Postgres?

I want to add hot_standby_feedback = on to a RDS readonly replica. The problem is that the replica currently has a parameter group already attached, which is inherited from the master. My question is:...
0
votes
1answer
94 views

PostgreSQL 9.6 pg_rewind - takes a long time to replicate

I use Streaming Replication,and Replication works normally. Two servers are HA and PostgreSQL DB is replicated. The data in the DB is about 40G. When a failover occurs, the slave is successfully ...
0
votes
0answers
15 views

issues with temporary table with proxysql using mysql replication

I have the following stage, we are implementing a database with 3 nodes with proxysql, this database is using percona xtradbcluster, inside the code is created a temporary table and is successful its ...
0
votes
1answer
19 views

Could you monitor all changes made within a postgresql database by somehow subscribing to the replication log?

I've been reading about postgresql replication and was wondering if it was somehow possible to listen to the replication binary log and push that to some tool like sumologic or splunk so that any ...
0
votes
0answers
34 views

Applying batch of row changes (delete) MySQL Replication Stuck

I am using Master Slave replication for master and slave . Master Configuration 64 GB RAM 2 TB SSD Slave Configuration : 16 GB RAM 2 TB SSD My database size is 750 GB. When i configured ...
0
votes
1answer
36 views

MySQL Fast Database Data Validation Master/Slave

I'm moving a MySQL database from the US to Australia and have a requirement where downtime is kept to an absolute minimum. The database is 400GB is size, replication is working without any issues. ...
0
votes
0answers
9 views

Is it possible to replicate a cluster (not just a node)?

Making a master-master cluster is easy, as is replicating one of the master nodes to a read only slave. As is replicating that RO slave to other slaves. But, of course if the master node which ...
0
votes
0answers
24 views

Is it a good idea to have a read connection point to both write database and read replica?

In my laravel app I have a write connection to a write database, and a read connection to a dns server that is connected to a single read replica (as instructed here) In the past the dns server was ...
0
votes
0answers
26 views

Migrate a legacy application that uses MySQL replication

I have been working on the migration of a legacy ecommerce web application to a new server with far hardened security. I have found an aspect with the MySQL server that I am not acquainted with and I ...
0
votes
0answers
15 views

Replicatation broker between master and slave with 'Can't find master key from keyring

I Have created new instance on AWS installed mysql on the server and made that server as Slave and added it to master. Master is in different network. 1) Installed the keyring. Started the ...
0
votes
0answers
37 views

Insert Missing Data in Slave Database

We have a master slave replication [MySQL 5.6]. However In slave database 2 rows is missing in one table. I've tried to solve this using Percona Toolkit as suggested here. But pt-table-checksum ...
0
votes
1answer
24 views

MySQL replication without baseline data import

I've been reading about MySQL replication and all the resources I've looked at say that a data import (be it a mysqldump, or a raw data dump import) is needed before replication can start. I'm trying ...
0
votes
0answers
93 views

Set slave_exec_mode value for RDS

I am trying to figure out a way to set slave_exec_mode to idempotent on Amazon RDS. I've checked the parameters associated with created DB instance on Amazon Console, but this parameter is not exit ...
0
votes
2answers
175 views

MariaDB slave replication stopped after slave upgrade to 10.1.41

After the recent MariaDB 10.1.41 update which happened on 01/Aug/2019, few of our slaves have stopped syncing relay logs from master which is on 10.1.40. Slaves which got automatically updated to 10.1....
0
votes
0answers
70 views

How to Un-Break MySQL Master/Slave replication

I had mysql master-slave replication working with mysql Ver 14.14 Distrib 5.7.27 -- totally awesome until it broke. Now, I'm not sure why but I cannot get it to work again. /etc/mysql/my.cnf has: ...
0
votes
0answers
27 views

In Mysql 8 user creation statements replicating on slave even after using replicate-ignore-db=mysql

Description: ` Normally in mysql replication Data Control Language (DCL) statements won’t replicate into slave if we are configuring replication with replicate-ignore-db=mysql or replicate-wild-...
0
votes
1answer
29 views

What will happen if master goes down in peer to peer replication?

In case of Peer to peer replication, if Master goes down, will the other two nodes continue synchronizing or not?
0
votes
1answer
62 views

MySQL replication process parallel with user process?

I have process which executes query like below on Mysql(InnoDB) slave INSERT ignore INTO user_profile_temp (some_fields) select some_fields from user_profile user_profile is bigtable of 8GB ...
0
votes
0answers
98 views

Physical and logical replication slots on Postgres (same time)

I wonder if it's possible to have a setup when changes from a single Postgres master streamed to two (or more) replicas same time, but some replicas to use streaming (logical) replication and some to ...
0
votes
2answers
134 views

syntax error for change replication

On a mysql 5.7 master, the following command generates syntax error. CHANGE REPLICATION FILTER REPLICATE_DO_DB = ('mydb') ERROR 1064 (42000): You have an error in your SQL syntax; check the manual ...
0
votes
1answer
32 views

Where is pt-table-checksum finding this hostname?

The Setup: An EC2 instance running MySQL 5.6 locally replicating to RDS MySQL. The VPC IP address range is 172.0.0.0/8. Somehow the slave got out of sync and I'm getting this error when I do SHOW ...
0
votes
2answers
302 views

Effect of --flush-logs on a slave mysqldump?

I have this database setup: Master -> Slave A I would like to accomplish the following: Master -> Slave A -> Slave B I have reviewed the documentation. Master and Slave A are both in an ...
0
votes
0answers
31 views

Is there any global variable for PostgreSQL replication has configured or not

Is there any unique identifier or any global variable which can tell us if replication is configured in current PostgreSQL server. Other than this query select pg_is_in_recovery(); The above ...
0
votes
1answer
61 views

Is there any unique identifier for PostgreSQL? How can the master identify its slave unqiuely?

Is there any way to have more than one PostgreSQL slave servers in the same system. If yes, how come a master detect each server as different slaves from the below query select * from ...
0
votes
1answer
283 views

pt-table-sync: syncing slave from master that has different credentials?

I have a MySQL slave under my full control and a master server where I have only read-only login. Also, logins are different. At some point replication have stopped due to some kind of problem. I ...
0
votes
0answers
32 views

SQL Server replication model snapshot, transactional and merge - which method can be used

I am trying to implement sql server database replication between 2 branch servers to a Head Office Server. My application is a distributed one, the main application is hosted on head office which is ...
0
votes
0answers
20 views

MySQL: Ignore a Row in a table of a particular Database

I had replication in place between 3 databases, I am trying to ignore a Row in a table of a particular Database. I tried many ways but i couldn't, and also i couldn't find anything in online that ...
0
votes
0answers
53 views

Error 'Unknown Collation: '2048' on query

I'm doing MYSQL Replication for the first time. Master mysql version: mysql Ver 14.14 Distrib 5.1.52, for pc-linux-gnu (i686) using readline 5.1 Slave Version: mysql Ver 14.14 Distrib 5.1.73, for ...
0
votes
0answers
23 views

mysql cluster with 1 master 1 node and 2 slave

My Query is I want to set up MySQL cluster with 1 Master 1 Node and 2 Slave with Auto failover. If my master is down node should assign slave as a master. Can anyone suggest me an idea to do that? As ...
0
votes
1answer
120 views

Postgresql streaming replication slow on macOS

I am using PostgreSQL 10.1 on MAC on which I am trying to set up streaming replication. I configured both master and slave to be on the same machine. I find the streaming replication lag to be slower ...
0
votes
1answer
35 views

Can i control access end point When some table data changed In Mysql Semisynchronous Replication

I'm trying to set up One master Multi slave in MySQL 5.7 My architecture is like this. Master - First slave(sync) Second slave, Third slave, Fourth slave, Fifth slave(async) My question is, If ...
0
votes
0answers
102 views

Why slaveDelay is not respected by mongoDB replica?

I've seen related article below: Mongodb replica config slaveDelay but data still sync immediately My secondary node is set to be delayed by 3600 seconds: ... "members" : [ { "_id" : 0, ...
0
votes
1answer
55 views

Seconds_Behind_Master alternates between 0 and a number x

I have a slave server with mariadb 10.3.10 on debian 9. For several days the server has been working correctly, Seconds_Behind_Master was always kept at 0 indicating that it was properly synchronized. ...