Questions tagged [mysql-5.6]

MySQL version 5.6 - please also tag with mysql for search purposes.

Filter by
Sorted by
Tagged with
2
votes
1answer
806 views

Upgrading mysql myisam 5.1 to mysql 5.6: force innodb on restore?

I inherited a DB using myisam on mysql 5.1 because of the need for fulltext search. I now read that fulltext search is available on mysql 5.6 innodb. Doing this would solve a lot of problems, as long ...
2
votes
1answer
2k views

Optimize table and query, aggregate by date or date-hour

I have a table storing sensor data (100M rows currently) from stations from different sites. In my case, sites may have many stations. Create table statement is as follows: CREATE TABLE sensor_data ( ...
2
votes
2answers
1k views

Can anyone offer an opinion on handlersocket vs memcached performance in MySQL 5.6

I must say I was a little mis(un)-informed about the MySQL Memcached plugin which offers the same NoSQL like access to InnoDB tables as HandlerSocket, I had only had experience with entirely ...
0
votes
1answer
3k views

Mysql Innodb as Key value store, performance

I read about NoSQL databases using Key value pairs (KVP) tables. So i wanted to find out if KVP tables would be faster than conventional relational tables (with multiple columns) in mysql with innodb ...
2
votes
0answers
4k views

mysql 5.6 GTID replication 'Got fatal error 1236 from master when reading data from binary log'

I Checked SHOW SLAVE STATUS error is "'Got fatal error 1236 from master when reading data from binary log: ''The slave is connecting using CHANGE MASTER TO MASTER_AUTO_POSITION = 1, but the master ...
1
vote
1answer
1k views

New users not working on MySQL 5.6 in Amazon RDS

I'm using the CREATE USER and GRANT commands as mentioned here http://dev.n0ise.net/2012/09/amazon-rds-mysql-add-additional-users-with-limited-previledges/ When I try to connect I get this in MySQL ...
3
votes
2answers
11k views

Master - Master replication Duplicate entry error

I've got a Master - Master replication setup and it worked fine for a couple of days but I keep getting: Duplicate entry errors after a few days. My setup is as follows: One server in The Netherlands ...
1
vote
1answer
4k views

How to get MySQL to iterate a subquery in an aggregate select?

Because the vocabulary describing what I'd like to do can be so disparate, I haven't had any luck figuring out why MySQL 5.6 is doing what it does. Consider the following two simple queries: #1 ...
2
votes
2answers
10k views

Access denied for user 'root'@'localhost' (using password yes)

I was trying to install MySQL 5.6.15 to my computer and got this error: unable to update security settings. access denied for user 'root'@'localhost' (using password yes) I guess current root ...
3
votes
2answers
4k views

Data lost in MySQL InnoDB after crash

I found a 6-days rollback in a MySQL 5.6 community edition server installation. It seems that some logs were lost, and I cannot understand why. 2013-12-22 20:38:54 380 [Note] Plugin 'FEDERATED' is ...
0
votes
0answers
1k views

Inserting and updating on same table

I am currently working on a database that aims to provide information regarding the amount of time people stay in a company's car-park premises. This is done using a table called "tbl_stay" which has ...
44
votes
2answers
104k views

InnoDB: Error: Table "mysql"."innodb_table_stats" not found after upgrade to mysql 5.6

I upgraded to mysql 5.6 from 5.5, and now my logs are littered with such messages on startup I found a possible solution here, but it does not seem official. http://forums.mysql.com/read.php?22,...
3
votes
1answer
1k views

How to upgrade MySQL (5.5) production DB to 5.6 with minimal downtime

Our existing Database size around 200GB. We want to use consistent, parallel backups methods. For testing, I migrated my Development DB from 5.5 to 5.6 by running mysqldump with option --single-...
0
votes
1answer
175 views

MySQL 5.6.14 will not use proper key/index in query

OS: ubuntu 12.04 amd64 DB: MySQL 5.6.14-community amd64 I cannot figure out why this query is using the wrong index and doing a full table scan on the ar_batch (ab) table. Perhaps someone can see why!...
1
vote
2answers
13k views

How to force higher values of open_files_limit or table_open_cache?

I'm having a frustrating problem where setting my.cnf to values higher than I currently have them does not 'take'. This is MySQL 5.6.14 on MacOS X 10.8.3 I'm trying to address dropped connections ...
3
votes
1answer
951 views

"Set Password" with a limited user

I'm using MySQL 5.6. I want to have a limited service-user which is able to create/modify the users of my databases. Now my problem is that I can quite figure out what privileges my service-user ...
0
votes
2answers
1k views

Converting MySQL 5.6.10 - 32 bit to 64 bit version

I am currently using MySQL DB Version 5.6.10 for 32 bit running in 64 bit Window OS.I want to change it to 64 bit without taking any dump..Can anyone help in this?
0
votes
0answers
195 views

unexpected null returned from calculated columns

I'm working on a program that will calculate journey times based on bluetooth MAC addresses and i'm trying to nail down the mySQL commands I need before I get cracking on the software part of it. i ...
4
votes
2answers
4k views

Can I move the undo log outside of ibdata1 in MySQL 5.6 on an existing server?

I've been growing concerned about the large size of ibdata1 that can never shrink even when using file-per-table on innodb Moving the undo log files outside seemed logical but this procedure seems ...
19
votes
5answers
78k views

Cannot open table mysql/innodb_index_stats [duplicate]

After a fresh install of XAMPP and import from my linux live db that is working to the windows Dev-stage, I started encountering problems with INSERT. Everything else seems to work well. The errors I ...
2
votes
2answers
7k views

changing TEMPORARY TABLE default collation

when I use CREATE TEMPORARY TABLE to create a temporary table, the collation of this table is utf8_unicode_ci by default. why by default it is utf8_unicode_ci? How can I change the default?
0
votes
1answer
1k views

MySQL Replace function throwing error

I am trying to update ^G (Ctrl G) in a table, below is scenario- CREATE TABLET TEST(COLA INT,DESCRIPTION VARCHAR(20)); I have crtl G in my data for description field, so to replace it with a \,I am ...
2
votes
1answer
3k views

GeomFromText in trigger has error

I have this trigger: DELIMITER $$ CREATE TRIGGER geometrytrigger BEFORE INSERT ON users FOR EACH ROW BEGIN SET NEW.user_geometry=GeomFromText(NEW.user_geometry); END$$ DELIMITER ; when I insert a ...
4
votes
1answer
3k views

How to drop all scheduler events in MySQL 5.6?

In MySQL 5.6 is there a way to drop all scheduler events with an administrative command or do I have to go through them one by one with DROP EVENT [IF EXISTS] event_name?
2
votes
2answers
376 views

Changing ORDER BY direction causes performance issue

I use MySQL 5.6, and I have two tables each with 16M rows: CREATE TABLE IF NOT EXISTS `newsstudios` ( `id` int(11) NOT NULL AUTO_INCREMENT, `title` varchar(255) COLLATE utf8_unicode_ci NOT NULL, ...
3
votes
3answers
13k views

How do I remove partitioning?

There is a table my_table which has not been created any partition in MySQL 5.6. And I'm trying to create partitions by procedure in my_table, when I run this code: alter table my_table remove ...
1
vote
1answer
749 views

Updating an FTS indexed column returns "Invalid InnoDB FTS Doc ID"

Environment: Ubuntu 12.04 (and 13.04) MySQL 5.6.11 I have a table which has a full text index on it (real table has much more columns and rows): DROP TABLE IF EXISTS articles; CREATE TABLE ...
0
votes
0answers
308 views

Find the partition where data lives in MySQL

Is there a way to select the partition name where a specified record actually lives in? The idea is something like: SELECT <PARTITION_NAME> FROM mytable WHERE <where_condition> I found a ...
6
votes
2answers
4k views

MySQL version confusion

How is this possible: I installed mysql-5.6.11-osx10.7-x86.dmg which is supposed to be version Mac OS X ver. 10.7 (x86, 32-bit), DMG Archive (32 bit!) But upon SHOW VARIABLES LIKE "%version%"; I get ...
0
votes
1answer
683 views

General error 1651 after a mysql migration

I finished migration from 5.1 to 5.6, and (with the same queries as before) mysql complains right away about: General error: 1651 Query cache is disabled; restart the server with query_cache_type=...
1
vote
0answers
551 views

Mysql 5.6 and install php5-mysql , mysql-common

I install Mysql 5.6 with this documentaion(in ubuntu 13.04) , now I need to install php5-mysql and mysql-common packages. can I install them with apt-get? I think they will install mysql5.5 compatible,...
2
votes
1answer
8k views

Issue on mysqldump in MySQL5.6

I did upgrade the MySQL server from 5.5 to 5.6 I am trying to take dump for a table like this mysqldump -uroot -p dba admin > D:\admin.sql But it gets following error mysqldump: Couldn't execute ...
0
votes
1answer
6k views

In place upgrade from MySQL 5.5 to 5.6.11 removes all users from user table

On Windows, I upgraded from 5.1 to 5.5 no problem. Copied my 5.1 data folder into my 5.5 instance Started mysqld skipping grants Ran mysql_upgrade All good, but going from 5.5 to 5.6: Copied 5.5 ...
2
votes
3answers
546 views

Does MySQL 5.6 support fan-in replication?

I've known for quite awhile that Continuent's Tungsten Replicator supports fan-in replication (example). By fan-in replication I mean combining multiple datasources into a single instance (like a ...
2
votes
1answer
847 views

Issues converting MyISAM table to InnoDB (auto column issue)

I'm having issues trying to convert a table from MyISAM to InnoDB in MySQL 5.6. The following is the table dump: -- -- Table structure for table `companies` -- DROP TABLE IF EXISTS `companies`; /*!...
0
votes
1answer
2k views

MySQL Read Speed and Partitioning on Separate Drives

Introduction Simple project but for an heavy read load -90% reads- over a table(~20Milion Rows ever-growing where I have to boost performance and ensure response low time for read queries) that was ...
1
vote
1answer
2k views

MySQL: replicating to a different table engine type

According to the replication documentation from MySQL, it is possible to set up replication from InnoDB source tables to MyISAM destination tables. Unfortunately, the documentation has little to say ...
0
votes
1answer
229 views

Is using the alpha version of Percona 5.6 safe? [closed]

I'm really sorry if my question is kind of very basic, but is something that is really making me thinking a lot about it for a long time. As Percona has a lot of lines of optimizing codes, I run it ...
3
votes
2answers
8k views

MySQL 5.6 OS X 10.8: how tell if my.cnf read?

With mysqld running, I expect to see that /etc/my.cnf has been used by at least one of the commands ps aux | grep mysql | grep -v grep mysqladmin variables | grep defaults-file showing the value of ...
3
votes
7answers
35k views

MySQL 5.6 Failure

I have the following in RPM_UPGRADE_HISTORY in /var/lib/mysql MySQL RPM upgrade to version 5.6.10-1.linux_glibc2.5 'pre' step running at Fri Mar 15 15:41:26 EDT 2013 ERR file(s): -rw-r----- 1 mysql ...
2
votes
1answer
1k views

Can't query one view from another?

Okay, I'm moving a database from SQL Server (which I already miss) to MySql 5.6. I'm having a problem creating a list of valid dates. In SQL Server I just used CTEs to build up numbers, then months, ...
1
vote
2answers
671 views

MySQL5.6 on Mac OS X 10.6.8 problems when granting permissions to root

I'm having serious problems with a MySQL 5.6 instance on a Mac Server. We had to upgrade MySQL to a newer version, but it turned to be a bad idea, as we lost control to it. We had a backup of the /...
1
vote
2answers
7k views

Unable to change engine to MyISAM in MySQL

I have installed MySQL 5.6.10 on Mac OS X 10.6.5. My issue is that MySQL is using InnoDB as its default engine. I have checked following engines are supported in MySQL: show engines\G *************...

1
17 18 19 20
21