Questions tagged [mysql-innodb-cluster]
MySQL's high-availability, multi-master, replication clustering solution for the InnoDB storage engine with automatic failover
58
questions
0
votes
1
answer
26
views
InnoDB Cluster ALTER large tables without causing lag
We need to run an ALTER TABLE command to add a new modified column to all servers in a InnoDB ClusterSet (Two clusters)
Example:
ALTER TABLE DB.tableA add column modified varchar(30) GENERATED ALWAYS ...
- 516
0
votes
0
answers
31
views
Using Clone for addInstance on MySQL Innodb Cluster uses 100% Memory
When trying to add a new node to a MySQL Innodb cluster using Cluster.addInstance() and selecting the Clone option, within 2 or 3 minutes the donor nodes memory usages hits 100% on a server with 36Gb ...
- 1
0
votes
0
answers
44
views
mysql clusterset vs replication
We run a medium sized app which may need the potential to grow but for a few years a single Mysql server would be sufficient. However we host on Azure which twice in the last 6 months has gone down ...
- 101
1
vote
1
answer
404
views
Configuring High Availability for MySQL Router in a MySQL InnoDB Cluster
I've configured a MySQL InnoDB Cluster for high availability with two servers on a Windows system (Server 1: h01xxxxxxxxx1, IP: 10.xxx.xx.61, Server 2: h01xxxxxxxxx2, IP: 10.xxx.xx.71), running ...
- 11
0
votes
1
answer
139
views
It's possible switchover a innodb cluster instance as primary?
If I am in topologyMode Single-Primary, it's possible to switchover the primary instance between machines in the cluster? I did not find anything in the documentation.
Ie: in my lab I have:
topology&...
- 801
1
vote
1
answer
39
views
Delay Async Replication Time ClusterSet
I have following setup:
Primary InnoDB Cluster with 3 instances(following Group Replication Protocol), R/W setting.
Replica InnoDB Cluster with 3 instances(following Group Replication Protocol), R/O ...
- 13
0
votes
1
answer
344
views
Load Balancing in mysql InnoDB cluster
I have set up an InnoDB cluster with one primary(R/W) and two secondaries (R/O) and bootstrapped a MySQL Router. The router has 2 port 6646(R/W port) and 6647(R/O) port. My application is currently ...
0
votes
1
answer
129
views
mysql-shell: assign the return for dba.checkInstanceConfiguration() to a javascript variable
I am trying to create a javascript file that is invoked by mysql-shell that can automatically
test, using dba.checkInstanceConfiguration("user@mysql-node:3306"), if instance is ready for ...
- 1
0
votes
1
answer
697
views
Mysql innodb cluster: Cannot start primary node
I am trying my first set up for innodb cluster based on the book 'Introducing InnoDB Cluster Learning the MySQL High Availability Stack' by Charles Bell.
While trying to launch the primary node with ...
- 1
0
votes
1
answer
197
views
MySQL InnoDB Cluster config - configure node address
I first asked this question on Stack Overflow but I woke up this morning to the realization that it belongs over here.
I'm setting up an InnoDB Cluster using mysqlsh. This is in Kubernetes, but I ...
- 101
1
vote
1
answer
322
views
Inndob Cluster - Automatically collect the output from mysqlsh?
Is there a way to take the output from mysqlshell and use it in a script or similar.
I have set up a basic cluster for testing (3 x MySQL 8.0.27 databases, running on Debian 11).
I am now trying to ...
- 2,166
1
vote
1
answer
544
views
Removing router from MySQL InnoDB cluster
Currently I have configured 3 node MYSQL InnoDB Cluster with two routers. Is it possible to remove one of the router from cluster? what are the implications ?
using cluster.listRouters() I could see ...
chandan
0
votes
1
answer
143
views
exitStateAction not working as expected on MySQL INNODB Cluster
I'm in the process of setting up and testing an Innodb Cluster. So far I have three nodes running 8.0.27 and two routers all working fine.
I now want to test what happens if the network connection ...
- 2,166
0
votes
1
answer
313
views
MySQL Group Replication Vs InnoDB cluster
I am new to MySQL world. I would like to understand the difference between MySQL Group Replication and InnoDB cluster, is there any other differences apart from router configuration for InnoDB cluster?...
- 1
2
votes
0
answers
304
views
mySQL cluster with Active Active DC
Let me give you a bit of background before jumping into the discussion.
Our company is running two DC's in active active scenario, we spent a lot of money on getting specialized hardware to be ...
0
votes
1
answer
832
views
Why slave_parallel_workers affects TPM
I ran a few HammerDB benchmarks and mess with the configurations. And I notice different values of slave_parallel_workers have a considerable impact on TPM.
As far as I understand, ...
- 113
1
vote
1
answer
325
views
MySQL Group Replication consistency EVENTUAL vs BEFORE_ON_PRIMARY_FAILOVER
As far as I understand, BEFORE_ON_PRIMARY_FAILOVER is exactly behaving like EVENTUAL in normal scenarios until a failover happened, which the former will block all new transactions until the new ...
- 113
0
votes
1
answer
309
views
MySQL client goes down after using setPrimaryInstance() in InnoDB clustering, but the cluster remains up with all nodes functioning
So, I have a cluster of 3 nodes, each in a different data center located in the same city. My architecture is a single primary one where one node (let's call it Node 1) is primary and the other two ...
- 101
0
votes
0
answers
83
views
MySQL 8 Innodb clustering add instance error
During MySQL 8 innodb clustering add instance.
Cluster.addInstance: The port '33101' for localAddress option is already in use. Specify an available port to be used with localAddress option or free ...
3
votes
0
answers
3k
views
MySQL/InnoDB cluster unable to reboot
I have a three-node MySQL/InnoDB cluster (version 8.0.25), that has been deployed by Juju/OpenStack a couple of month ago. The cluster has recently crashed and I unfortunately can't manage to bring it ...
- 31
0
votes
0
answers
183
views
1205 Lock wait timeout exceeded after switching to multi-primary topology in MySQL InnoDB Cluster
I have set up an InnoDB cluster using MySQL (version 8.0.23) Shell. I added three nodes to my cluster. At first, my topology was a single-primary topology where I had one master node and two slave ...
- 101
0
votes
1
answer
3k
views
Mysql Innodb Cluster Replication
Hello Everyone,
This is the first time I'm doing cluster replication. But I stuck on Adding Instance. I don't know why this error is coming behind. "The error says The START GROUP_REPLICATION ...
- 11
0
votes
2
answers
3k
views
What contributes to the transaction size on a MySQL UPDATE?
Background
We're running a MySQL 8 INNODB cluster behind some Java services. We received an error from the application because we'd exceeded the group replication transaction size limit (“Error on ...
- 103
1
vote
2
answers
589
views
MySQL hangs on SELECT from table with blob fields
I managed to create a mysql 8 InnoDB cluster with three nodes (VPS in one dedicated server, 25GB ram in each VPS, Total RAM in the server 96GB) and MySQL Router 8 everything works great but when I try ...
- 111
2
votes
1
answer
3k
views
MySQL InnoDB Cluster - Add instance issue with local port
I have an issue to add instance to MySQL InnoDB Cluster using MySQL Shell. Here are the steps that I have done:
Login to one DB-01 node
Run command: mysqlsh
shell.connect('username@ip-address:port');
...
- 123
1
vote
1
answer
2k
views
Cannot rejoin or add instance to MySQL InnoDB cluster
I have a MySQL InnoDB cluster running where I had added three nodes, one is having the Primary role and the others are Secondary. Today morning, the two secondary nodes were removed from the cluster ...
0
votes
1
answer
134
views
Innodb mysql 5.7 cluster wont join after reboot
I get the following when I try to recover the cluster from a complete outage. Can anyone advise what's going on
cluster = dba.rebootClusterFromCompleteOutage()
Dba.rebootClusterFromCompleteOutage: ...
- 121
2
votes
1
answer
4k
views
Mysql InnoDB Cluster
I'm trying to setup mysql innodb cluster. I have couple of Digital Ocean (DO) instances running centos 7.
I have installed Mysql Ver 8.0.21 for Linux on x86_64 (MySQL Community Server - GPL) on the DO ...
- 121
0
votes
1
answer
2k
views
MySQL Group Replication - Offline Node with cluster Metadata 1.0.1
I have a production MySQL Group Replication setup out of three Nodes. The cluster has Metadata Version 1.0.1. Today, one node went down an during rejoin phase, it says, it cannot connect to the ...
- 11
1
vote
2
answers
575
views
Tuning MySQL on GROUP REPLICATION
I'm close to switch from old version of MySQL 5.6 ( master / slave configuration ) to MySQL 8 ( 3 nodes on multi-master configuration ) in GROUP REPLICATION.
The tables are 99% InnoDB.
The webfarm ...
- 11
3
votes
0
answers
2k
views
MySQL Group Replication - Peer address is not valid
I have been trying to set up an MySQL Innodb Cluster, initially with two databases, both MySQL 8.0.19.
But I keep getting the same errors.
On the first one ([email protected]:3306), I have created ...
- 2,166
0
votes
1
answer
331
views
Innodb cluster options missing
I have successfully installed and run an INNODB Cluster on mysql 8.0.19
However I cannot set options for the cluster
when we run
cluster=dba.getCluster();
cluster.options();
We get the following ...
- 135
3
votes
2
answers
1k
views
MySQL incorrectly saying serverID non unique when adding an instance to the InnoDB cluster
I Get the following error when adding the second instance to a MYSQL Innodb Cluster
ERROR: Cannot add instance 'XXX' to the cluster because it has the same server ID of a member of the cluster. ...
- 135
2
votes
1
answer
1k
views
How to configure MySQL Router on two application servers?
I have three MySQL servers running with group replication and inside a InnoDB Cluster.
I have two app servers that will be connecting to the cluster and I need to configure mysql router on both app ...
- 71
2
votes
1
answer
2k
views
Relay log read fail, relay or master log currupt ,How to repair?
I am running mysql InnoDB cluster 8.0.17(group replication)
During the repication the slave disk gets full and no space left at all the thread waits for the disk space to be freed at the same time ...
- 53
1
vote
1
answer
6k
views
Unable to add new instance on MySQL InnoDB cluster
I'm setting up new MySQL InnoDB cluster 8.0.16 consisting of three instances:
srv-mysql-01
srv-mysql-02
srv-mysql-03
I run JS-script in mysql shell for build cluster:
mysqlsh --file=/tmp/...
- 121
0
votes
1
answer
145
views
Repair GTID from Restore with sql_log_bin=0 and then drop table
I have been experimenting with mysql innodb cluster. One of the errors i've come across I don't know how to remedy or why exactly it causes a permanent death to any slave that wishes to catch up to ...
- 155
0
votes
0
answers
206
views
Mysql 8.0 table_rows problem
I'm doing an application and I have the following problem:
I'm doing a LOAD DATA INFILE into a table from a txt file, that has 2 million rows.
I want to see the table_rows of my table with:
SELECT ...
0
votes
1
answer
250
views
MySQL CLustering Options
I have two MySQL Database Servers i.e.
One is Active Server --> Master and second is Passive Server --> Slave.
And as we know we have 3-4 MySQL HR,DR Solutions / Clustering options.For example
01 : ...
1
vote
3
answers
5k
views
Innodb cluster setup error
Reframed:
Here are the steps I followed but is resulting into an error:
I am connected to my primary node (10.0.0.4) and I checked the config of all the nodes using below:
MySQL localhost JS > ...
- 43
-1
votes
1
answer
4k
views
InnoDB cluster error: ReferenceError: cluster is not defined
I was setting up the MySQL InnoDB cluster, when I got this error. I created the cluster from the primary node, the cluster.status() was giving output as 'ONLINE' at this point with only one node part ...
- 43
1
vote
1
answer
691
views
Secondary nodes in mysql 8.0.15 innodb cluster are not reading group_replication_member_expel_timeout variable from my.cnf
I have setup a 3 node mysql 8.0.15 innodb cluster. I have been trying to set group_replication_member_expel_timeout variable to 60 via the /etc/my.cnf file. Although the primary node has read the ...
0
votes
1
answer
401
views
Why does MySQL InnoDB cluster not show MySQL server instances in MySQL shell?
I followed the docker innodb cluster manual method to create an InnoDB cluster. Now in the MySQL server instance, by running select * from performance_schema.replication_group_members, I can see the ...
- 101
0
votes
1
answer
338
views
how the mysql server settings replicatd in innodb cluster
I just started learning about cluster so I don't have much knowledge if question is not appropriate please forgive me.
I have a 3 node InnoDB cluster running .suppose if I want to tune my server by ...
- 53
2
votes
1
answer
559
views
How to setup two mysql servers with group replication to work individually, when no network
I have two mysql servers in two different places. Both servers must be able to read and write. All tables are designed to based on unique id (UUID) primary key. I want to sync these two databases live ...
- 146
0
votes
1
answer
717
views
Application considerations when using a multi-primary innodb cluster
I'm developing a scalable cloud application and I wish to use a multi-primary cluster to be better able to scale horizontally when needed. I have experience with a single primary cluster configuration....
1
vote
0
answers
948
views
Delete query end state lasts tens of seconds in innodb cluster
I have an InnoDB cluster with three nodes running with 4GB ram and 80GB SSD on Linode.
I am trying to delete around 240000 of rows from MySQL InnoDB cluster in one go. However, it stuck at query end ...
- 193
1
vote
2
answers
572
views
check slave status innodb cluster
On InnoDB cluster, I have tried to execute command 'show slave status' to get status of a slave.
But the system returns 0 row. So now I want to check the status of a slave, check which bin log file is ...
- 13
3
votes
2
answers
2k
views
How to change MySQL InnoDB cluster from single primary mode to multi primary mode?
My goal is to setup, in a lab environment, a MySQL InnoDB cluster in multi-primary mode.
I have read much, but I cannot get this setup to work.
Ubuntu 16.04.3 server LTS x 3
SQL0 - SQL2
Ubuntu 16....
- 131
4
votes
1
answer
668
views
Does MySQL allows incoming queries while altering a table?
I'm adding a new column to an existing table say ABC with the following query,
ALTER TABLE ABC add column STATUS int(10) NOT NULL
This is done in master, slave and secondary slaves. Meanwhile, ...
- 141